lkml.org 
[lkml]   [2016]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] net: stmmac: unify mdio functions
Date
stmmac_mdio_{read|write} and stmmac_mdio_{read|write}_gmac4 are not
enought different for being split.
The only differences between thoses two functions are shift/mask for
addr/reg/clk_csr.

This patch introduce a per platform set of variable for setting thoses
shift/mask and unify mdio read and write functions.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 6 +
.../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 6 +
.../net/ethernet/stmicro/stmmac/dwmac100_core.c | 7 ++
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 6 +
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 121 ++++-----------------
5 files changed, 48 insertions(+), 98 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 5bd4c05..3ced2e1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -507,6 +507,12 @@ struct mac_link {
struct mii_regs {
unsigned int addr; /* MII Address */
unsigned int data; /* MII Data */
+ unsigned int addr_shift; /* MII address shift */
+ unsigned int reg_shift; /* MII reg shift */
+ unsigned int addr_mask; /* MII address mask */
+ unsigned int reg_mask; /* MII reg mask */
+ unsigned int clk_csr_shift;
+ unsigned int clk_csr_mask;
};

/* Helpers to manage the descriptors for chain and ring modes */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 7df4ff1..b21d03f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -534,6 +534,12 @@ struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr, int mcbins,
mac->link.speed = GMAC_CONTROL_FES;
mac->mii.addr = GMAC_MII_ADDR;
mac->mii.data = GMAC_MII_DATA;
+ mac->mii.addr_shift = 11;
+ mac->mii.addr_mask = 0x0000F800;
+ mac->mii.reg_shift = 6;
+ mac->mii.reg_mask = 0x000007C0;
+ mac->mii.clk_csr_shift = 2;
+ mac->mii.clk_csr_mask = 0xF;

/* Get and dump the chip ID */
*synopsys_id = stmmac_get_synopsys_id(hwid);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index 6418b2e..a1d582f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -192,6 +192,13 @@ struct mac_device_info *dwmac100_setup(void __iomem *ioaddr, int *synopsys_id)
mac->link.speed = 0;
mac->mii.addr = MAC_MII_ADDR;
mac->mii.data = MAC_MII_DATA;
+ mac->mii.addr_shift = 11;
+ mac->mii.addr_mask = 0x0000F800;
+ mac->mii.reg_shift = 6;
+ mac->mii.reg_mask = 0x000007C0;
+ mac->mii.clk_csr_shift = 2;
+ mac->mii.clk_csr_mask = 0xF;
+
/* Synopsys Id is not available on old chips */
*synopsys_id = 0;

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 51019b7..eaed7cb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -430,6 +430,12 @@ struct mac_device_info *dwmac4_setup(void __iomem *ioaddr, int mcbins,
mac->link.speed = GMAC_CONFIG_FES;
mac->mii.addr = GMAC_MDIO_ADDR;
mac->mii.data = GMAC_MDIO_DATA;
+ mac->mii.addr_shift = 21;
+ mac->mii.addr_mask = GENMASK(25, 21);
+ mac->mii.reg_shift = 16;
+ mac->mii.reg_mask = GENMASK(20, 16);
+ mac->mii.clk_csr_shift = 8;
+ mac->mii.clk_csr_mask = GENMASK(11, 8);

/* Get and dump the chip ID */
*synopsys_id = stmmac_get_synopsys_id(hwid);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 6796c28..23322fd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -42,13 +42,6 @@
#define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
#define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)

-#define MII_PHY_ADDR_GMAC4_SHIFT 21
-#define MII_PHY_ADDR_GMAC4_MASK GENMASK(25, 21)
-#define MII_PHY_REG_GMAC4_SHIFT 16
-#define MII_PHY_REG_GMAC4_MASK GENMASK(20, 16)
-#define MII_CSR_CLK_GMAC4_SHIFT 8
-#define MII_CSR_CLK_GMAC4_MASK GENMASK(11, 8)
-
static int stmmac_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_addr)
{
unsigned long curr;
@@ -68,8 +61,8 @@ static int stmmac_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_addr)
/**
* stmmac_mdio_read
* @bus: points to the mii_bus structure
- * @phyaddr: MII addr reg bits 15-11
- * @phyreg: MII addr reg bits 10-6
+ * @phyaddr: MII addr
+ * @phyreg: MII reg
* Description: it reads data from the MII register from within the phy device.
* For the 7111 GMAC, we must set the bit 0 in the MII address register while
* accessing the PHY registers.
@@ -83,9 +76,15 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
unsigned int mii_data = priv->hw->mii.data;

int data;
- u16 value = (((phyaddr << 11) & (0x0000F800)) |
- ((phyreg << 6) & (0x000007C0)));
- value |= MII_BUSY | ((priv->clk_csr & 0xF) << 2);
+ u32 value = MII_BUSY;
+
+ value |= (phyaddr << priv->hw->mii.addr_shift)
+ & priv->hw->mii.addr_mask;
+ value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
+ value |= (priv->clk_csr & priv->hw->mii.clk_csr_mask)
+ << priv->hw->mii.clk_csr_shift;
+ if (priv->plat->has_gmac4)
+ value |= MII_GMAC4_READ;

if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
return -EBUSY;
@@ -104,8 +103,8 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
/**
* stmmac_mdio_write
* @bus: points to the mii_bus structure
- * @phyaddr: MII addr reg bits 15-11
- * @phyreg: MII addr reg bits 10-6
+ * @phyaddr: MII addr
+ * @phyreg: MII reg
* @phydata: phy data
* Description: it writes the data into the MII register from within the device.
*/
@@ -117,85 +116,16 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;

- u16 value =
- (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
- | MII_WRITE;
+ u32 value = MII_WRITE | MII_BUSY;

- value |= MII_BUSY | ((priv->clk_csr & 0xF) << 2);
+ value |= (phyaddr << priv->hw->mii.addr_shift)
+ & priv->hw->mii.addr_mask;
+ value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;

- /* Wait until any existing MII operation is complete */
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
- return -EBUSY;
-
- /* Set the MII address register to write */
- writel(phydata, priv->ioaddr + mii_data);
- writel(value, priv->ioaddr + mii_address);
-
- /* Wait until any existing MII operation is complete */
- return stmmac_mdio_busy_wait(priv->ioaddr, mii_address);
-}
-
-/**
- * stmmac_mdio_read_gmac4
- * @bus: points to the mii_bus structure
- * @phyaddr: MII addr reg bits 25-21
- * @phyreg: MII addr reg bits 20-16
- * Description: it reads data from the MII register of GMAC4 from within
- * the phy device.
- */
-static int stmmac_mdio_read_gmac4(struct mii_bus *bus, int phyaddr, int phyreg)
-{
- struct net_device *ndev = bus->priv;
- struct stmmac_priv *priv = netdev_priv(ndev);
- unsigned int mii_address = priv->hw->mii.addr;
- unsigned int mii_data = priv->hw->mii.data;
- int data;
- u32 value = (((phyaddr << MII_PHY_ADDR_GMAC4_SHIFT) &
- (MII_PHY_ADDR_GMAC4_MASK)) |
- ((phyreg << MII_PHY_REG_GMAC4_SHIFT) &
- (MII_PHY_REG_GMAC4_MASK))) | MII_GMAC4_READ;
-
- value |= MII_BUSY | ((priv->clk_csr & MII_CSR_CLK_GMAC4_MASK)
- << MII_CSR_CLK_GMAC4_SHIFT);
-
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
- return -EBUSY;
-
- writel(value, priv->ioaddr + mii_address);
-
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
- return -EBUSY;
-
- /* Read the data from the MII data register */
- data = (int)readl(priv->ioaddr + mii_data);
-
- return data;
-}
-
-/**
- * stmmac_mdio_write_gmac4
- * @bus: points to the mii_bus structure
- * @phyaddr: MII addr reg bits 25-21
- * @phyreg: MII addr reg bits 20-16
- * @phydata: phy data
- * Description: it writes the data into the MII register of GMAC4 from within
- * the device.
- */
-static int stmmac_mdio_write_gmac4(struct mii_bus *bus, int phyaddr, int phyreg,
- u16 phydata)
-{
- struct net_device *ndev = bus->priv;
- struct stmmac_priv *priv = netdev_priv(ndev);
- unsigned int mii_address = priv->hw->mii.addr;
- unsigned int mii_data = priv->hw->mii.data;
-
- u32 value = (((phyaddr << MII_PHY_ADDR_GMAC4_SHIFT) &
- (MII_PHY_ADDR_GMAC4_MASK)) |
- ((phyreg << MII_PHY_REG_GMAC4_SHIFT) &
- (MII_PHY_REG_GMAC4_MASK))) | MII_GMAC4_WRITE;
-
- value |= MII_BUSY | ((priv->clk_csr & MII_CSR_CLK_GMAC4_MASK)
- << MII_CSR_CLK_GMAC4_SHIFT);
+ value |= ((priv->clk_csr & priv->hw->mii.clk_csr_mask)
+ << priv->hw->mii.clk_csr_shift);
+ if (priv->plat->has_gmac4)
+ value |= MII_GMAC4_WRITE;

/* Wait until any existing MII operation is complete */
if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
@@ -305,13 +235,8 @@ int stmmac_mdio_register(struct net_device *ndev)
#endif

new_bus->name = "stmmac";
- if (priv->plat->has_gmac4) {
- new_bus->read = &stmmac_mdio_read_gmac4;
- new_bus->write = &stmmac_mdio_write_gmac4;
- } else {
- new_bus->read = &stmmac_mdio_read;
- new_bus->write = &stmmac_mdio_write;
- }
+ new_bus->read = &stmmac_mdio_read;
+ new_bus->write = &stmmac_mdio_write;

new_bus->reset = &stmmac_mdio_reset;
snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x",
--
2.7.3
\
 
 \ /
  Last update: 2016-12-01 16:22    [W:0.280 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site