lkml.org 
[lkml]   [2016]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
On Tue, Nov 08, 2016 at 11:47:08AM +0800, zhichang.yuan wrote:
> This patch solves two issues:
> 1) parse and get the right I/O range from DTS node whose parent does not
> define the corresponding ranges property;
>
> There are some special ISA/LPC devices that work on a specific I/O range where
> it is not correct to specify a ranges property in DTS parent node as cpu
> addresses translated from DTS node are only for memory space on some
> architectures, such as Arm64. Without the parent 'ranges' property, current
> of_translate_address() return an error.
> Here we add a fixup function, of_get_isa_indirect_io(). During the OF address
> translation, this fixup will be called to check the 'reg' address to be
> translating is for those sepcial ISA/LPC devices and get the I/O range
> directly from the 'reg' property.
>
> 2) eliminate the I/O range conflict risk with PCI/PCIE leagecy I/O device;
>
> The current __of_address_to_resource() always translates the I/O range to PIO.
> But this processing is not suitable for our ISA/LPC devices whose I/O range is
> not cpu address(Arnd had stressed this in his comments on V2,V3 patch-set).
> Here, we bypass the mapping between cpu address and PIO for the special
> ISA/LPC devices. But to drive these ISA/LPC devices, a I/O port address below
> PCIBIOS_MIN_IO is needed by in*/out*(). Which means there is conflict risk
> between I/O range of [0, PCIBIOS_MIN_IO) and PCI/PCIE legacy I/O range of [0,
> IO_SPACE_LIMIT).
> To avoid the I/O conflict, this patch reserve the I/O range below
> PCIBIOS_MIN_IO.
>
> Signed-off-by: zhichang.yuan <yuanzhichang@hisilicon.com>
> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
> ---
> .../arm/hisilicon/hisilicon-low-pin-count.txt | 31 ++++++++++++
> arch/arm64/include/asm/io.h | 6 +++
> arch/arm64/kernel/extio.c | 25 ++++++++++
> drivers/of/address.c | 56 +++++++++++++++++++++-
> drivers/pci/pci.c | 6 +--
> include/linux/of_address.h | 17 +++++++
> include/linux/pci.h | 8 ++++
> 7 files changed, 145 insertions(+), 4 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
> new file mode 100644
> index 0000000..13c8ddd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
> @@ -0,0 +1,31 @@
> +Hisilicon Hip06 low-pin-count device
> + Usually LPC controller is part of PCI host bridge, so the legacy ISA ports
> + locate on LPC bus can be accessed direclty. But some SoCs have independent
> + LPC controller, and access the legacy ports by triggering LPC I/O cycles.
> + Hisilicon Hip06 implements this LPC device.
> +
> +Required properties:
> +- compatible: should be "hisilicon,low-pin-count"
> +- #address-cells: must be 2 which stick to the ISA/EISA binding doc.
> +- #size-cells: must be 1 which stick to the ISA/EISA binding doc.
> +- reg: base memory range where the register set of this device is mapped.
> +
> +Note:
> + The node name before '@' must be "isa" to represent the binding stick to the
> + ISA/EISA binding specification.
> +
> +Example:
> +
> +isa@a01b0000 {
> + compatible = "hisilicom,low-pin-count";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + reg = <0x0 0xa01b0000 0x0 0x1000>;
> +
> + ipmi0: bt@e4 {
> + compatible = "ipmi-bt";
> + device_type = "ipmi";
> + reg = <0x01 0xe4 0x04>;
> + status = "disabled";
> + };
> +};


This documentation file needs to be part of the next patch. It has nothing to do with
what you are trying to fix here.


> diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
> index 136735d..c26b7cc 100644
> --- a/arch/arm64/include/asm/io.h
> +++ b/arch/arm64/include/asm/io.h
> @@ -175,6 +175,12 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
> #define outsl outsl
>
> DECLARE_EXTIO(l, u32)
> +
> +#define indirect_io_enabled indirect_io_enabled
> +extern bool indirect_io_enabled(void);
> +
> +#define addr_is_indirect_io addr_is_indirect_io
> +extern int addr_is_indirect_io(u64 taddr);
> #endif
>
>
> diff --git a/arch/arm64/kernel/extio.c b/arch/arm64/kernel/extio.c
> index 647b3fa..3d45fa8 100644
> --- a/arch/arm64/kernel/extio.c
> +++ b/arch/arm64/kernel/extio.c
> @@ -19,6 +19,31 @@
>
> struct extio_ops *arm64_extio_ops;
>
> +/**
> + * indirect_io_enabled - check whether indirectIO is enabled.
> + * arm64_extio_ops will be set only when indirectIO mechanism had been
> + * initialized.
> + *
> + * Returns true when indirectIO is enabled.
> + */
> +bool indirect_io_enabled(void)
> +{
> + return arm64_extio_ops ? true : false;
> +}
> +
> +/**
> + * addr_is_indirect_io - check whether the input taddr is for indirectIO.
> + * @taddr: the io address to be checked.
> + *
> + * Returns 1 when taddr is in the range; otherwise return 0.
> + */
> +int addr_is_indirect_io(u64 taddr)
> +{
> + if (arm64_extio_ops->start > taddr || arm64_extio_ops->end < taddr)

start >= taddr ?

> + return 0;
> +
> + return 1;
> +}
>
> BUILD_EXTIO(b, u8)
>
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index 02b2903..cc2a05d 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -479,6 +479,50 @@ static int of_empty_ranges_quirk(struct device_node *np)
> return false;
> }
>
> +
> +/*
> + * of_isa_indirect_io - get the IO address from some isa reg property value.
> + * For some isa/lpc devices, no ranges property in ancestor node.
> + * The device addresses are described directly in their regs property.
> + * This fixup function will be called to get the IO address of isa/lpc
> + * devices when the normal of_translation failed.
> + *
> + * @parent: points to the parent dts node;
> + * @bus: points to the of_bus which can be used to parse address;
> + * @addr: the address from reg property;
> + * @na: the address cell counter of @addr;
> + * @presult: store the address paresed from @addr;
> + *
> + * return 1 when successfully get the I/O address;
> + * 0 will return for some failures.

Bah, you are returning a signed int, why 0 for failure? Return a negative value with
error codes. Otherwise change the return value into a bool.

> + */
> +static int of_get_isa_indirect_io(struct device_node *parent,
> + struct of_bus *bus, __be32 *addr,
> + int na, u64 *presult)
> +{
> + unsigned int flags;
> + unsigned int rlen;
> +
> + /* whether support indirectIO */
> + if (!indirect_io_enabled())
> + return 0;
> +
> + if (!of_bus_isa_match(parent))
> + return 0;
> +
> + flags = bus->get_flags(addr);
> + if (!(flags & IORESOURCE_IO))
> + return 0;
> +
> + /* there is ranges property, apply the normal translation directly. */

s/there is ranges/if we have a 'ranges'/

> + if (of_get_property(parent, "ranges", &rlen))
> + return 0;
> +
> + *presult = of_read_number(addr + 1, na - 1);
> + /* this fixup is only valid for specific I/O range. */
> + return addr_is_indirect_io(*presult);
> +}
> +
> static int of_translate_one(struct device_node *parent, struct of_bus *bus,
> struct of_bus *pbus, __be32 *addr,
> int na, int ns, int pna, const char *rprop)
> @@ -595,6 +639,15 @@ static u64 __of_translate_address(struct device_node *dev,
> result = of_read_number(addr, na);
> break;
> }
> + /*
> + * For indirectIO device which has no ranges property, get
> + * the address from reg directly.
> + */
> + if (of_get_isa_indirect_io(dev, bus, addr, na, &result)) {
> + pr_debug("isa indirectIO matched(%s)..addr = 0x%llx\n",
> + of_node_full_name(dev), result);
> + break;
> + }
>
> /* Get new parent bus and counts */
> pbus = of_match_bus(parent);
> @@ -688,8 +741,9 @@ static int __of_address_to_resource(struct device_node *dev,
> if (taddr == OF_BAD_ADDR)
> return -EINVAL;
> memset(r, 0, sizeof(struct resource));
> - if (flags & IORESOURCE_IO) {
> + if (flags & IORESOURCE_IO && taddr >= PCIBIOS_MIN_IO) {
> unsigned long port;
> +
> port = pci_address_to_pio(taddr);
> if (port == (unsigned long)-1)
> return -EINVAL;
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index ba34907..1a08511 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3263,7 +3263,7 @@ int __weak pci_register_io_range(phys_addr_t addr, resource_size_t size)
>
> #ifdef PCI_IOBASE
> struct io_range *range;
> - resource_size_t allocated_size = 0;
> + resource_size_t allocated_size = PCIBIOS_MIN_IO;
>
> /* check if the range hasn't been previously recorded */
> spin_lock(&io_range_lock);
> @@ -3312,7 +3312,7 @@ phys_addr_t pci_pio_to_address(unsigned long pio)
>
> #ifdef PCI_IOBASE
> struct io_range *range;
> - resource_size_t allocated_size = 0;
> + resource_size_t allocated_size = PCIBIOS_MIN_IO;

Have you checked that pci_pio_to_address still returns valid values after this? I know that
you are trying to take into account PCIBIOS_MIN_IO limit when allocating reserving the IO ranges,
but the values added in the io_range_list are still starting from zero, no from PCIBIOS_MIN_IO,
so the calculation of the address in this function could return negative values casted to pci_addr_t.

Maybe you want to adjust the range->start value in pci_register_io_range() as well to have it
offset by PCIBIOS_MIN_IO as well.

Best regards,
Liviu

>
> if (pio > IO_SPACE_LIMIT)
> return address;
> @@ -3335,7 +3335,7 @@ unsigned long __weak pci_address_to_pio(phys_addr_t address)
> {
> #ifdef PCI_IOBASE
> struct io_range *res;
> - resource_size_t offset = 0;
> + resource_size_t offset = PCIBIOS_MIN_IO;
> unsigned long addr = -1;
>
> spin_lock(&io_range_lock);
> diff --git a/include/linux/of_address.h b/include/linux/of_address.h
> index 3786473..deec469 100644
> --- a/include/linux/of_address.h
> +++ b/include/linux/of_address.h
> @@ -24,6 +24,23 @@ struct of_pci_range {
> #define for_each_of_pci_range(parser, range) \
> for (; of_pci_range_parser_one(parser, range);)
>
> +
> +#ifndef indirect_io_enabled
> +#define indirect_io_enabled indirect_io_enabled
> +static inline bool indirect_io_enabled(void)
> +{
> + return false;
> +}
> +#endif
> +
> +#ifndef addr_is_indirect_io
> +#define addr_is_indirect_io addr_is_indirect_io
> +static inline int addr_is_indirect_io(u64 taddr)
> +{
> + return 0;
> +}
> +#endif
> +
> /* Translate a DMA address from device space to CPU space */
> extern u64 of_translate_dma_address(struct device_node *dev,
> const __be32 *in_addr);
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 0e49f70..7f6bbb6 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -2130,4 +2130,12 @@ static inline bool pci_ari_enabled(struct pci_bus *bus)
> /* provide the legacy pci_dma_* API */
> #include <linux/pci-dma-compat.h>
>
> +/*
> + * define this macro here to refrain from compilation error for some
> + * platforms. Please keep this macro at the end of this header file.
> + */
> +#ifndef PCIBIOS_MIN_IO
> +#define PCIBIOS_MIN_IO 0
> +#endif
> +
> #endif /* LINUX_PCI_H */
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯

\
 
 \ /
  Last update: 2016-11-09 12:40    [W:0.241 / U:8.356 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site