lkml.org 
[lkml]   [2016]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/11] hisi_sas: check SATA FIS when directly attaching SATA device
Date
From: Xiang Chen <chenxiang66@hisilicon.com>

Check ERR bit of status to decide whether there is something wrong with
initial register-D2H FIS. If error exists, PHY reset the channel to
restart OOB.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index a5faa4d..cda3baf 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2537,6 +2537,16 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
goto end;
}

+ /* check ERR bit of Status Register */
+ if (fis->status & ATA_ERR) {
+ dev_warn(dev, "sata int: phy%d FIS status: 0x%x\n", phy_no,
+ fis->status);
+ disable_phy_v2_hw(hisi_hba, phy_no);
+ enable_phy_v2_hw(hisi_hba, phy_no);
+ res = IRQ_NONE;
+ goto end;
+ }
+
if (unlikely(phy_no == 8)) {
u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE);

--
1.9.1
\
 
 \ /
  Last update: 2016-11-07 13:25    [W:0.201 / U:1.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site