lkml.org 
[lkml]   [2016]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm64: dts: sunxi: enable EHCI1, OHCI1 and USB PHY nodes in Pine64
Hi,

On Sat, Nov 05, 2016 at 10:38:30PM +0800, Icenowy Zheng wrote:
> Pine64 have two USB Type-A ports, which are wired to the two ports of
> A64 USB PHY, and the lower port is the EHCI/OHCI1 port.
>
> Enable the necessary nodes to enable the lower USB port to work.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> index 4709590..d836995 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> @@ -72,3 +72,15 @@
> &i2c1_pins {
> bias-pull-up;
> };
> +
> +&usbphy {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};

Please order the nodes by alphebetical order.

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-11-06 19:57    [W:0.296 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site