lkml.org 
[lkml]   [2016]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/2] Add TI SCI Reset Driver
From
Date


On 11/4/16 11:42 AM, Andrew F. Davis wrote:
> Hello all,
>
> This series adds a reset controller driver that uses the TI SCI
> protocol to manage resets.
>
> The TI SCI protocol is used to communicate with power management
> controllers used by some SoCs. These controllers manage the various
> power domains, clocks, and resets available on a SoC.
>
> This series is based on drivers for TI SCI and the first two controlled
> elements above, these series can be found here:
>
> TI-SCI: http://www.spinics.net/lists/arm-kernel/msg536851.html
> PM Domains: http://www.spinics.net/lists/devicetree/msg146621.html
> Clocks: https://www.spinics.net/lists/linux-clk/msg12785.html
>
> Thanks,
> Andrew
>
> Changes from v2:
> - Merged DT binding patch and reset header patch
> - Added locking for reset bit mask
>
> Changes from v1:
> - Revised dt binding
> - CC Linux ARM list
>
> Andrew F. Davis (2):
> Documentation: dt: reset: Add TI SCI reset binding
> reset: Add the TI SCI reset driver
>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>

\
 
 \ /
  Last update: 2016-11-05 22:03    [W:0.049 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site