lkml.org 
[lkml]   [2016]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] regulator: pwm: DT: Add ramp delay for exponential voltage transition
Date
Some PWM regulator has the exponential transition in voltage change as
opposite to fixed slew-rate linear transition on other regulators.
For such PWM regulators, add the property for providing the delay
from DT node.

Add DT binding details of the new property
"pwm-regulator-voltage-ramp-time-us" added for providing voltage
transition delay.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
CC: Douglas Anderson <dianders@chromium.org>
CC: Aleksandr Frid <afrid@nvidia.com>

---
This patch is continuation of discussion on patch
regulator: pwm: Fix regulator ramp delay for continuous mode
https://patchwork.kernel.org/patch/9216857/
where is it discussed to have separate property for PWM which has
exponential voltage transition.
---
Documentation/devicetree/bindings/regulator/pwm-regulator.txt | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index 3aeba9f..a163f42 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -54,6 +54,16 @@ Optional properties:
--------------------
- enable-gpios: GPIO to use to enable/disable the regulator

+- pwm-regulator-voltage-ramp-time-us: Integer, voltage ramp time in
+ microseconds. Some PWM regulator has the exponential
+ transition in voltage change as opposite to fixed
+ slew-rate linear transition on other regulators.
+ For such regulator, this property is used to provide
+ the settling time for voltage change which is same
+ for any voltage change.
+ If PWM regulator supports the fixed slew rate then
+ property "regulator-ramp-delay" should be used.
+
Any property defined as part of the core regulator binding can also be used.
(See: ../regulator/regulator.txt)

--
2.1.4
\
 
 \ /
  Last update: 2016-11-04 18:54    [W:0.064 / U:1.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site