lkml.org 
[lkml]   [2016]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] arm64: dts: exynos: Add flash led dt node for TM2 board
Dear Seung-Woo,

I think that this patch looks good to me.
But, When I tested this patch on my TM2 board,
the flash turn off after some millisecond automatically.

It is strange situation. Unfortunately, I don't know the cause.
I think that we better to check this issue for more time.

Best Regards,
Chanwoo Choi

On 2016년 11월 30일 13:48, Seung-Woo Kim wrote:
> From: Ingi Kim <ingi2.kim@samsung.com>
>
> This patch adds Kinetic ktd2692 flash led device node for TM2 board.
>
> Signed-off-by: Ingi Kim <ingi2.kim@samsung.com>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> ---
> Change from v1:
> - gpio active value is set with defined macro instead of value.
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 13 +++++++++++++
> 1 files changed, 13 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> index f21bdc2..0d454aa 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -58,6 +58,19 @@
> reg = <0x0 0x20000000 0x0 0xc0000000>;
> };
>
> + camera-flash {
> + compatible = "kinetic,ktd2692";
> + ctrl-gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
> + aux-gpios = <&gpc0 2 GPIO_ACTIVE_HIGH>;
> +
> + flash-led {
> + label = "ktd2692-flash";
> + led-max-microamp = <300000>;
> + flash-max-microamp = <1500000>;
> + flash-max-timeout-us = <1835000>;
> + };
> + };
> +
> gpio-keys {
> compatible = "gpio-keys";
>
>

\
 
 \ /
  Last update: 2016-11-30 09:36    [W:0.058 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site