lkml.org 
[lkml]   [2016]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] media: Driver for Toshiba et8ek8 5MP sensor
Hi,

On Tue, Nov 01, 2016 at 12:54:08AM +0200, Sakari Ailus wrote:
> > > Thanks, this answered half of my questions already. ;-)
> > :-).
> >
> > I'll have to go through the patches, et8ek8 driver is probably not
> > enough to get useful video. platform/video-bus-switch.c is needed for
> > camera switching, then some omap3isp patches to bind flash and
> > autofocus into the subdevice.
> >
> > Then, device tree support on n900 can be added.
>
> I briefly discussed with with Sebastian.
>
> Do you think the elusive support for the secondary camera is worth keeping
> out the main camera from the DT in mainline? As long as there's a reasonable
> way to get it working, I'd just merge that. If someone ever gets the
> secondary camera working properly and nicely with the video bus switch,
> that's cool, we'll somehow deal with the problem then. But frankly I don't
> think it's very useful even if we get there: the quality is really bad.

If we want to keep open the option to add proper support for the
second camera, we could also add the bus switch and not add the
front camera node in DT. Then adding the front camera does not
require DT or userspace API changes. It would need an additional
DT quirk in arch/arm/mach-omap2/board-generic.c for RX51, which
adds the CCP2 bus settings from the camera node to the bus
switch node to keep isp_of_parse_node happy. That should be
easy to implement and not add much delay in upstreaming.

For actually getting both cameras available with runtime-switching
the proper solution would probably involve moving the parsing of
the bus-settings to the sensor driver and providing a callback.
This callback can be called by omap3isp when it wants to configure
the phy (which is basically when it starts streaming). That seems
to be the only place needing the buscfg anyways.

Then the video-bus-switch could do something like this (pseudocode):

static void get_buscfg(struct *this, struct *buscfg) {
if (selected_cam == 0)
return this->sensor_a->get_buscfg(buscfg);
else
return this->sensor_b->get_buscfg(buscfg);
}

Regarding the usefulness: I noticed, that the Neo900 people also
plan to have the bus-switch [0]. It's still the same crappy front-cam,
though. Nevertheless it might be useful for testing. It has nice
test-image capabilities, which might be useful for regression
testing once everything is in place.

[0] http://neo900.org/stuff/block-diagrams/neo900/neo900.html

-- Sebastian
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-11-03 23:49    [W:0.236 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site