lkml.org 
[lkml]   [2016]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 06/11] clk: qcom: Fix .set_rate to handle alpha PLLs w/wo dynamic update
On 11/03, Rajendra Nayak wrote:
>
>
> On 11/03/2016 03:24 AM, Stephen Boyd wrote:
> > On 09/29, Rajendra Nayak wrote:
> >> Alpha PLLs which do not support dynamic update feature
> >> need to be explicitly disabled before a rate change.
> >> The ones which do support dynamic update do so within a
> >> single vco range, so add a min/max freq check for such
> >> PLLs so they fall in the vco range.
> >>
> >> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> >
> > Is Taniya the author?
>
> ah, yes, I seem to have messed up the authorship in v3, will fix.
>
> >
> >> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> >> ---
> >> drivers/clk/qcom/clk-alpha-pll.c | 49 +++++++++++++++++++++++++++++++++-------
> >> drivers/clk/qcom/clk-alpha-pll.h | 3 +++
> >> 2 files changed, 44 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> >> index 89c7fdb..6f90a86 100644
> >> --- a/drivers/clk/qcom/clk-alpha-pll.c
> >> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> >> @@ -382,16 +382,41 @@ clk_alpha_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> >> static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> >> unsigned long prate)
> >> {
> >> + bool enabled;
> >> struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> >> const struct pll_vco *vco;
> >> u32 l, off = pll->offset;
> >> u64 a;
> >>
> >> rate = alpha_pll_round_rate(rate, prate, &l, &a);
> >> - vco = alpha_pll_find_vco(pll, rate);
> >> - if (!vco) {
> >> - pr_err("alpha pll not in a valid vco range\n");
> >> - return -EINVAL;
> >> + enabled = clk_hw_is_enabled(hw);
> >> +
> >> + if (pll->flags & SUPPORTS_DYNAMIC_UPDATE) {
> >> + /*
> >> + * PLLs which support dynamic updates support one single
> >> + * vco range, between min_rate and max_rate supported
> >> + */
> >> + if (rate < pll->min_rate || rate > pll->max_rate) {
> >> + pr_err("alpha pll rate outside supported min/max range\n");
> >> + return -EINVAL;
> >> + }
> >> + } else {
> >> + /*
> >> + * All alpha PLLs which do not support dynamic update,
> >> + * should be disabled before a vco update.
> >> + */
> >> + if (enabled)
> >> + hw->init->ops->disable(hw);
> >
> > Please just call the function directly instead of going through
> > the init structure.
>
> But we now have 2 different versions of disable based on clk_ops,
> clk_alpha_pll_disable and clk_alpha_pll_hwfsm_disable.
>

So have two set_rate ops that call a common function that takes a
function pointer pair of enable/disable ops to call? Or have a
flag to know which one to call? Either way, don't use the init
structure after registration time please.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2016-11-03 20:49    [W:0.069 / U:1.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site