lkml.org 
[lkml]   [2016]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH/RFC v2 2/3] regulator: fixed: dt: Allow an optional over current pin
Date
Add support for an optional over current input pin which
can be used to send an over current event to the regulator
consumer.

Cc: devicetree@vger.kernel.org
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
Documentation/devicetree/bindings/regulator/fixed-regulator.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 4fae41d..b145abb 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -11,6 +11,7 @@ If this property is missing, the default assumed is Active low.
- gpio-open-drain: GPIO is open drain type.
If this property is missing then default assumption is false.
-vin-supply: Input supply name.
+- over-current-gpios: Input gpio that signal an over current condition.

Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
@@ -26,6 +27,7 @@ Example:
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 16 0>;
+ over-current-gpios = <&gpio1 18 0>;
startup-delay-us = <70000>;
enable-active-high;
regulator-boot-on;
--
2.10.1
\
 
 \ /
  Last update: 2016-11-03 12:13    [W:0.044 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site