lkml.org 
[lkml]   [2016]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] Input: ti_am335x_tsc: Add support for ti,charge-delay-ns
On Fri, Nov 11, 2016 at 01:28:19PM +0530, Mugunthan V N wrote:
> ti,charge-delay will be deprecated as it represents number of
> clock cycles and the DT entries are done in assumption of 3MHz
> TSCADC clock, but clock can be set upto 24MHz. So driver add
> support for ti,charge-delay-ns and do not drop support for
> ti,charge-delay to support old dtbs and it will be assumed that
> it is for 3MHz TSCADC clock and will be calculated as per current
> clock speed.
>
> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

> ---
> drivers/input/touchscreen/ti_am335x_tsc.c | 31 +++++++++++++++++++++++--------
> 1 file changed, 23 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
> index 7953381d939a..104b3640f728 100644
> --- a/drivers/input/touchscreen/ti_am335x_tsc.c
> +++ b/drivers/input/touchscreen/ti_am335x_tsc.c
> @@ -379,15 +379,30 @@ static int titsc_parse_dt(struct platform_device *pdev,
> ts_dev->coordinate_readouts = 5;
> }
>
> - err = of_property_read_u32(node, "ti,charge-delay",
> + err = of_property_read_u32(node, "ti,charge-delay-ns",
> &ts_dev->charge_delay);
> - /*
> - * If ti,charge-delay value is not specified, then use
> - * CHARGEDLY_OPENDLY as the default value.
> - */
> - if (err < 0) {
> - ts_dev->charge_delay = CHARGEDLY_OPENDLY;
> - dev_warn(&pdev->dev, "ti,charge-delay not specified\n");
> + if (err >= 0) {
> + u64 charge_delay = ts_dev->charge_delay;
> +
> + charge_delay *= ADC_CLK;
> + do_div(charge_delay, 1E9);
> + ts_dev->charge_delay = (u32)charge_delay;
> + } else {
> + err = of_property_read_u32(node, "ti,charge-delay",
> + &ts_dev->charge_delay);
> + /*
> + * If ti,charge-delay value is not specified, then use
> + * CHARGEDLY_OPENDLY as the default value.
> + */
> + if (err < 0) {
> + ts_dev->charge_delay = CHARGEDLY_OPENDLY;
> + dev_warn(&pdev->dev, "ti,charge-delay not specified\n");
> + }
> + /*
> + * ti,charge-delay is specified with referrence to 3MHz,
> + * so convert it to in referrence to current clock
> + */
> + ts_dev->charge_delay *= ADC_CLK / 3000000;
> }
>
> return of_property_read_u32_array(node, "ti,wire-config",
> --
> 2.11.0.rc0.7.gbe5a750
>

--
Dmitry

\
 
 \ /
  Last update: 2016-11-29 22:09    [W:0.338 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site