lkml.org 
[lkml]   [2016]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 11/13] clocksource: export the clocks_calc_mult_shift to use by timestamp code
    Date
    From: Murali Karicheri <m-karicheri2@ti.com>

    The CPSW CPTS driver is capable of doing timestamping on tx/rx packets and
    requires to know mult and shift factors for timestamp conversion from raw
    value to nanoseconds (ptp clock). Now these mult and shift factors are
    calculated manually and provided through DT, which makes very hard to
    support of a lot number of platforms, especially if CPTS refclk is not the
    same for some kind of boards and depends on efuse settings (Keystone 2
    platforms). Hence, export clocks_calc_mult_shift() to allow drivers like
    CPSW CPTS (and other ptp drivesr) to benefit from automaitc calculation of
    mult and shift factors.

    Cc: John Stultz <john.stultz@linaro.org>
    Cc: Thomas Gleixner <tglx@linutronix.de>
    Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
    Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
    ---
    kernel/time/clocksource.c | 1 +
    1 file changed, 1 insertion(+)

    diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
    index 7e4fad7..150242c 100644
    --- a/kernel/time/clocksource.c
    +++ b/kernel/time/clocksource.c
    @@ -89,6 +89,7 @@ clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 maxsec)
    *mult = tmp;
    *shift = sft;
    }
    +EXPORT_SYMBOL_GPL(clocks_calc_mult_shift);

    /*[Clocksource internal variables]---------
    * curr_clocksource:
    --
    2.10.1
    \
     
     \ /
      Last update: 2016-11-29 00:09    [W:4.426 / U:0.648 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site