lkml.org 
[lkml]   [2016]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Input: touchscreen: ads7846 - change msleep to usleep_range for small msecs
Date
msleep(1~20) may not do what the caller intends, and will often sleep longer.
(~20 ms actual sleep for any value given in the 1~20ms range)
This is not the desired behaviour for many cases like device resume time,
device suspend time, device enable time, retry logic, etc.
Thus, change msleep to usleep_range for precise wakeups.

Signed-off-by: Aniroop Mathur <a.mathur@samsung.com>
---
drivers/input/touchscreen/ads7846.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 1ce3ecb..b1a5a6c 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -58,7 +58,7 @@
* files.
*/

-#define TS_POLL_DELAY 1 /* ms delay before the first sample */
+#define TS_POLL_DELAY 1000 /* us delay before the first sample */
#define TS_POLL_PERIOD 5 /* ms delay between samples */

/* this driver doesn't aim at the peak continuous sample rate */
@@ -857,7 +857,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
struct ads7846 *ts = handle;

/* Start with a small delay before checking pendown state */
- msleep(TS_POLL_DELAY);
+ usleep_range(TS_POLL_DELAY, TS_POLL_DELAY + 100);

while (!ts->stopped && get_pendown_state(ts)) {

--
2.6.2
\
 
 \ /
  Last update: 2016-11-28 19:31    [W:0.044 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site