lkml.org 
[lkml]   [2016]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3] cpufreq: brcmstb-cpufreq: CPUfreq driver for older Broadcom STB SoCs
On Mon, Nov 28, 2016 at 11:14 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Tuesday, November 22, 2016 1:32:45 PM CET Markus Mayer wrote:
>> From: Markus Mayer <mmayer@broadcom.com>
>>
>> This CPUfreq driver provides basic frequency scaling for older Broadcom
>> STB SoCs that do not use AVS firmware with DVFS support. There is no
>> support for voltage scaling.
>>
>> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
>> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> This causes multiple build errors in linux-next, please fix asap or
> drop the patch again. My feeling is that it's probably too late to
> fix it for v4.10, but that's up to Viresh and Rafael of course.
>
>> +#define BRCMSTB_CPUFREQ_PREFIX "brcmstb"
>> +#define BRCMSTB_CPUFREQ_NAME BRCMSTB_CPUFREQ_PREFIX "-cpufreq"
>> +
>> +/* We search for these compatible strings. */
>> +#define BRCMSTB_DT_CPU_CLK_CTRL "brcm,brcmstb-cpu-clk-div"
>> +#define BRCMSTB_DT_MEMC_DDR "brcm,brcmstb-memc-ddr"
>> +#define BRCM_AVS_CPU_DATA "brcm,avs-cpu-data-mem"
>> +
>> +/* We also need a few clocks in device tree. These are node names. */
>> +#define BRCMSTB_CLK_MDIV_CH0 "cpu_mdiv_ch0"
>> +#define BRCMSTB_CLK_NDIV_INT "cpu_ndiv_int"
>> +#define BRCMSTB_CLK_SW_SCB "sw_scb"
>
> Not critical but the use of those macros obfuscates the DT interfaces
> here and made it harder to analyse what was going on.
>
> Also, a couple of them are lacking a DT binding.
>
>> +static int get_frequencies(const struct cpufreq_policy *policy,
>> + unsigned int *vco_freq, unsigned int *cpu_freq,
>> + unsigned int *scb_freq)
>> +{
>> + struct clk *cpu_ndiv_int, *sw_scb;
>> +
>> + cpu_ndiv_int = __clk_lookup(BRCMSTB_CLK_NDIV_INT);
>> + if (!cpu_ndiv_int)
>> + return -ENODEV;
>> +
>> + sw_scb = __clk_lookup(BRCMSTB_CLK_SW_SCB);
>> + if (!sw_scb)
>> + return -ENODEV;
>> +
>> + /* return frequencies in kHz */
>> + *vco_freq = clk_get_rate(cpu_ndiv_int) / 1000;
>> + *cpu_freq = clk_get_rate(policy->clk) / 1000;
>> + *scb_freq = clk_get_rate(sw_scb) / 1000;
>> +
>> + return 0;
>> +}
>
> You really can't do this:
>
> ../drivers/cpufreq/brcmstb-cpufreq.c: In function 'get_frequencies':
> ../drivers/cpufreq/brcmstb-cpufreq.c:71:17: error: implicit declaration of function '__clk_lookup';did you mean 'key_lookup'? [-Werror=implicit-function-declaration]
> cpu_ndiv_int = __clk_lookup(BRCMSTB_CLK_NDIV_INT);
> ^~~~~~~~~~~~
>
> __clk_lookup is an internal API for the clk providers.
>
> In particular, relying on undocumented internal names of the
> clk provider in a device driver is inappropriate.
>
>> +static const struct of_device_id brcmstb_cpufreq_match[] = {
>> + { .compatible = BRCMSTB_DT_CPU_CLK_CTRL },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(platform, brcmstb_cpufreq_match);
>
> This is a simple typo, also causing the build to fail:
>
> FATAL: drivers/cpufreq/brcmstb-cpufreq: sizeof(struct platform_device_id)=24 is not a modulo of the size of section __mod_platform__<identifier>_device_table=392.
>

I've dropped the patch.

Markus, please fix the problems pointed out by Arnd and resend.

Thanks,
Rafael

\
 
 \ /
  Last update: 2016-11-28 14:30    [W:0.083 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site