lkml.org 
[lkml]   [2016]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/7] add binding for stm32 multifunctions timer driver
Rob,

Would you mind casting an eye on this please?

On Wed, 23 Nov 2016, Benjamin Gaignard wrote:
> 2016-11-23 10:21 GMT+01:00 Lee Jones <lee.jones@linaro.org>:
> > On Wed, 23 Nov 2016, Benjamin Gaignard wrote:
> >
> >> 2016-11-22 17:52 GMT+01:00 Lee Jones <lee.jones@linaro.org>:
> >> > On Tue, 22 Nov 2016, Benjamin Gaignard wrote:
> >> >
> >> >> Add bindings information for stm32 timer MFD
> >> >>
> >> >> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> >> >> ---
> >> >> .../devicetree/bindings/mfd/stm32-timer.txt | 53 ++++++++++++++++++++++
> >> >> 1 file changed, 53 insertions(+)
> >> >> create mode 100644 Documentation/devicetree/bindings/mfd/stm32-timer.txt
> >> >>
> >> >> diff --git a/Documentation/devicetree/bindings/mfd/stm32-timer.txt b/Documentation/devicetree/bindings/mfd/stm32-timer.txt
> >> >> new file mode 100644
> >> >> index 0000000..3cefce1
> >> >> --- /dev/null
> >> >> +++ b/Documentation/devicetree/bindings/mfd/stm32-timer.txt
> >> >> @@ -0,0 +1,53 @@
> >> >> +STM32 multifunctions timer driver
> >> >
> >> > "STM32 Multi-Function Timer/PWM device bindings"
> >> >
> >> > Doesn't this shared device have a better name?
> >>
> >> In SoC documentation those hardware blocks are named "advanced-control
> >> timers", "general purpose timers" or "basic timers"
> >> "stm32-timer" name is already used for clock source driver, that why I
> >> have prefix it with mfd
> >
> > MFD is a Linuxisum and has no place in hardware description.
> >
> > Please used one of the names you mentioned above.
>
> I will go for "st,stm32-advanced-timer"
>
> >
> > Hopefully the one that best fits.
> >
> >> >> +stm32 timer MFD allow to handle at the same time pwm and IIO timer devices
> >> >
> >> > No need for this sentence.
> >> >
> >> OK
> >>
> >> >> +Required parameters:
> >> >> +- compatible: must be one of the follow value:
> >> >> + "st,stm32-mfd-timer1"
> >> >> + "st,stm32-mfd-timer2"
> >> >> + "st,stm32-mfd-timer3"
> >> >> + "st,stm32-mfd-timer4"
> >> >> + "st,stm32-mfd-timer5"
> >> >> + "st,stm32-mfd-timer6"
> >> >> + "st,stm32-mfd-timer7"
> >> >> + "st,stm32-mfd-timer8"
> >> >> + "st,stm32-mfd-timer9"
> >> >> + "st,stm32-mfd-timer10"
> >> >> + "st,stm32-mfd-timer11"
> >> >> + "st,stm32-mfd-timer12"
> >> >> + "st,stm32-mfd-timer13"
> >> >> + "st,stm32-mfd-timer14"
> >> >
> >> > We don't normally number devices.
> >> >
> >> > What's stopping you from simply doing:
> >> >
> >> > pwm1: pwm1@40010000 {
> >> > compatible = "st,stm32-pwm";
> >> > };
> >> > pwm2: pwm1@40020000 {
> >> > compatible = "st,stm32-pwm";
> >> > };
> >> > pwm3: pwm1@40030000 {
> >> > compatible = "st,stm32-pwm";
> >> > };
> >> >
> >>
> >> Because each instance of the hardware is slightly different: number of
> >> pwm channels, triggers capabilities, etc ..
> >> so I need to distinguish them.
> >> Since it look to be a problem I will follow your suggestion and add a
> >> property this driver to be able to identify each instance.
> >> Do you think that "id" parameter (integer for 1 to 14) is acceptable ?
> >
> > Unfortunately not. IDs aren't allowed in DT.
> >
> > What about "pwm-chans" and "trigger"?
> >
> > pwm-chans : Number of available channels available
>
> For pwm I need those 4 properties:
> st,pwm-number: the number of PWM devices

st,pwm-num-chan is already documented.

Please use that instead of creating new properties.

> st,complementary: if exist have complementary ouput
> st,32bit-counter: if exist have 32 bits counter
> st,breakinput-polarity: if set enable break input feature.
>
> Is it acceptable from pwm maintainer point of view ?
>
> > trigger : Boolean value specifying whether a timer is present
>
> Following our discussion on IRC I will try to code for your proposal:
>
> advanced-timer@40010000 {
> compatible = "st,stm32-advanced-timer";
> reg = <0x40010000 0x400>;
> clocks = <&rcc 0 160>;
> clock-names = "clk_int";
>
> pwm@0 {
> compatible = "st,stm32-pwm";
> st,pwm-number= <4>;
> st,complementary;
> st,breakinput;
> };
>
> timer@0 {
> reg = <1>;
> compatible = "st,stm32-iio-timer";
> interrupts = <27>;
> triggers = <5 2 3 4>;
> };
> };
>
> triggers parameter will be used to know which trigger are valid for
> the IIO device

Except for "st,pwm-number" as mentioned above, this looks good to me.

Rob, would what do you think?

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-11-24 09:50    [W:0.215 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site