lkml.org 
[lkml]   [2016]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/2] ARM: dts: sun6i: Disable display pipeline by default
On Thu, Nov 24, 2016 at 02:43:37PM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> While we now support the internal display pipeline found on sun6i, it
> is possible that we are unable to enable the display for some boards,
> due to a lack of drivers for the panels or bridges found on them. If
> the display pipeline is enabled, the driver will try to enable, and
> possibly screw up the simple framebuffer U-boot had configured.
>
> This series disables the display pipeline by default, and re-enables
> it for the A31 Hummingbird, which already had its display pipeline
> enabled.
>
> The series can go in after 4.10-rc1, as a fix, but should not be delayed
> till the next release.

Applied both, thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-11-24 21:02    [W:0.038 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site