lkml.org 
[lkml]   [2016]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRE: [PATCH] fsl/usb: Workarourd for USB erratum-A005697
On Thu, 24 Nov 2016, Sriram Dash wrote:

> >From: Changming Huang [mailto:jerry.huang@nxp.com]
> >As per USB specification, in the Suspend state, the status bit does not change until
> >the port is suspended. However, there may be a delay in suspending a port if there
> >is a transaction currently in progress on the bus.
> >
> >In the USBDR controller, the PORTSCx[SUSP] bit changes immediately when the
> >application sets it and not when the port is actually suspended
> >
> >Workaround for this issue involves waiting for a minimum of 10ms to allow the
> >controller to go into SUSPEND state before proceeding ahead

The USB core guarantees that there won't be any data transactions in
progress when a root hub is suspended. There might possibly be an SOF
transaction, but that doesn't take more than a few microseconds at
most. Certainly nowhere near 10 ms!

Given that we already perform a 150-us delay, is this change really
needed?

Alan Stern

\
 
 \ /
  Last update: 2016-11-24 17:54    [W:0.100 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site