lkml.org 
[lkml]   [2016]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH 5/6] apalis-tk1: working sd card detect on v1.1 hw
Date
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Add sd card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---

arch/arm/boot/dts/tegra124-apalis-eval.dts | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 2b5a0f3..2715692 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -187,14 +187,8 @@
/* Apalis SD1 */
sdhci@700b0400 {
status = "okay";
- /*
- * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
- * features some magic properties even though the external
- * loopback is disabled and the internal loopback used as per
- * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being
- * set to 0xfffd according to the TRM!
- * cd-gpios = <&gpio TEGRA_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
- */
+ /* SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc3>;
};
--
2.9.3
\
 
 \ /
  Last update: 2016-11-24 02:21    [W:0.111 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site