lkml.org 
[lkml]   [2016]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH/RFC -next] net: phy: Fix double free in phy_detach()
Date
During "poweroff" on sh73a0/kzm9g:

WARNING: CPU: 0 PID: 1271 at drivers/base/devres.c:889 phy_detach+0x44/0x60
Modules linked in:
CPU: 0 PID: 1271 Comm: halt Not tainted 4.9.0-rc6-kzm9g-05637-gb090128865050239 #823
Hardware name: Generic SH73A0 (Flattened Device Tree)
[<c010e7e0>] (unwind_backtrace) from [<c010aeb8>] (show_stack+0x10/0x14)
[<c010aeb8>] (show_stack) from [<c02f2b68>] (dump_stack+0xa4/0xdc)
[<c02f2b68>] (dump_stack) from [<c0121204>] (__warn+0xcc/0xfc)
[<c0121204>] (__warn) from [<c01212d8>] (warn_slowpath_null+0x1c/0x24)
[<c01212d8>] (warn_slowpath_null) from [<c03aac40>] (phy_detach+0x44/0x60)
[<c03aac40>] (phy_detach) from [<c03ae924>] (smsc911x_stop+0xf4/0x10c)
[<c03ae924>] (smsc911x_stop) from [<c0464c4c>] (__dev_close_many+0x94/0xb8)
[<c0464c4c>] (__dev_close_many) from [<c0464d64>] (__dev_close+0x20/0x34)
[<c0464d64>] (__dev_close) from [<c046d8ac>] (__dev_change_flags+0x8c/0x130)
[<c046d8ac>] (__dev_change_flags) from [<c046d968>] (dev_change_flags+0x18/0x48)
[<c046d968>] (dev_change_flags) from [<c04d1aac>] (devinet_ioctl+0x33c/0x708)
[<c04d1aac>] (devinet_ioctl) from [<c0450694>] (sock_ioctl+0x29c/0x2f8)
[<c0450694>] (sock_ioctl) from [<c02079a0>] (vfs_ioctl+0x20/0x34)
[<c02079a0>] (vfs_ioctl) from [<c0208398>] (do_vfs_ioctl+0x870/0x9c4)
[<c0208398>] (do_vfs_ioctl) from [<c0208520>] (SyS_ioctl+0x34/0x5c)
[<c0208520>] (SyS_ioctl) from [<c0106dc0>] (ret_fast_syscall+0x0/0x1c)
---[ end trace 4555b9be7369b463 ]---

If device_release_driver(&phydev->mdio.dev) was called, it has already
released all resources belonging to the PHY device. Hence the subsequent
call to phy_led_triggers_unregister() may cause a double free, leading
to the warning.

Move the call to phy_led_triggers_unregister() before the possible call
to device_release_driver() to fix this.

Fixes: 2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy link state change")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Is this the right fix?
---
drivers/net/phy/phy_device.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 9e8f048891bd192f..b32457660db66de4 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -981,6 +981,8 @@ void phy_detach(struct phy_device *phydev)
phydev->attached_dev = NULL;
phy_suspend(phydev);

+ phy_led_triggers_unregister(phydev);
+
/* If the device had no specific driver before (i.e. - it
* was using the generic driver), we unbind the device
* from the generic driver so that there's a chance a
@@ -994,8 +996,6 @@ void phy_detach(struct phy_device *phydev)
}
}

- phy_led_triggers_unregister(phydev);
-
/*
* The phydev might go away on the put_device() below, so avoid
* a use-after-free bug by reading the underlying bus first.
--
1.9.1
\
 
 \ /
  Last update: 2016-11-22 19:16    [W:0.454 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site