lkml.org 
[lkml]   [2016]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [RESEND PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios
    From
    Date
    On Monday 21 November 2016 10:23 PM, Axel Haslam wrote:
    > The hawk board VBUS is fixed to a 5v source, and the over
    > current pin is actually not connected to the SoC.
    >
    > Do not reseve these gpios for OHCI as they are not related
    > to usb.
    >
    > Signed-off-by: Axel Haslam <ahaslam@baylibre.com>

    As discussed over the MMC/SD patches, this patch should be based off the
    hawkboard schematic, not the LCDK schematic.

    Thanks,
    Sekhar

    \
     
     \ /
      Last update: 2016-11-22 11:39    [W:2.543 / U:0.348 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site