lkml.org 
[lkml]   [2016]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 0/3] spi-nor: Add support for Intel SPI serial flash controller
From
Date
Hi all,

Le 21/11/2016 à 11:51, Lee Jones a écrit :
> On Sat, 19 Nov 2016, Boris Brezillon wrote:
>
>> On Sat, 19 Nov 2016 09:35:46 +0200
>> Mika Westerberg <mika.westerberg@linux.intel.com> wrote:
>>
>>> On Fri, Nov 18, 2016 at 07:04:26PM +0000, Lee Jones wrote:
>>>> On Mon, 14 Nov 2016, Mika Westerberg wrote:
>>>>
>>>>> This is fifth version of the series. You can find the previous versions
>>>>> archived on:
>>>>>
>>>>> v4: https://lwn.net/Articles/703773/
>>>>> v3: https://lwn.net/Articles/697231/
>>>>> v2: http://lists.infradead.org/pipermail/linux-mtd/2016-June/068277.html
>>>>> v1: https://lkml.org/lkml/2016/6/14/269
>>>>>
>>>>> This patch series adds support for the Intel SPI serial flash controller
>>>>> found on many recent Intel CPUs including Baytrail and Braswell. This
>>>>> driver makes it possible to access the BIOS and other platform data which
>>>>> is stored on the SPI serial flash. It is also possible to upgrade the BIOS
>>>>> using this driver if it has not been protected by special hardware bits.
>>>>>
>>>>> The patch [1/3] includes documentation how to upgrade BIOS on MinnowBoard
>>>>> MAX.
>>>>>
>>>>> Since poking the SPI serial flash can brick the machine, this driver can
>>>>> only be enabled when CONFIG_EXPERT=y and even then it will remain read-only
>>>>> unless instructed othwerwise by module parameter.
>>>>>
>>>>> Changes from v4:
>>>>> * Use INTEL_SPI_FIFO_SZ instead of hard coded value of 64 bytes
>>>>> * Don't increment i inside call to FDATA() macro
>>>>> * Check nor->read_opcode in intel_spi_read() and return
>>>>> -EINVAL if not supported. We may add SFDP support later on.
>>>>>
>>>>> Changes from v3:
>>>>> * Added ACKs from Lee Jones.
>>>>> * Use bus instead of dev->bus in PCI accesses
>>>>>
>>>>> Changes from v2:
>>>>> * Rebased on top of v4.8-rc2
>>>>> * Updated intel_spi_read/write() according spi-nor core changes which
>>>>> drops retlen parameter and returns number of bytes read/written.
>>>>>
>>>>> Changes from v1:
>>>>> * Older hardware does not support 64k erase command so added erase_64k
>>>>> flag which is set only for Broxton (BXT).
>>>>> * Fix protection range offset for Broxton. Now there is ispi->pregs
>>>>> pointing to the start of the protection registers.
>>>>> * Change naming of constants from BCR_BYT -> BYT_BCR and so on.
>>>>> * Drop lpc_ich_finalize_spi_cell() and initialize cell directly in
>>>>> lpc_ich_init_spi().
>>>>> * Use info->type in switch in lpc_ich_init_spi().
>>>>> * Add defines for magic numbers used in lpc_ich_init_spi().
>>>>> * Use PLATFORM_DEVID_NONE with mfd_add_devices().
>>>>>
>>>>> Mika Westerberg (3):
>>>>> spi-nor: Add support for Intel SPI serial flash controller
>>>>> mfd: lpc_ich: Add support for SPI serial flash host controller
>>>>> mfd: lpc_ich: Add support for Intel Apollo Lake SoC
>>>>
>>>> What's the plan for this set?
>>>
>>> I was hoping to get this merged via MTD tree but I haven't got much
>>> comments from the maintainers. No idea if anyone is going to take this :-(
>>
>> Marek, Cyrille, can you take a look?
>
> I can push through MFD, no problem.
>
> I just need Acks from all subsystems concerned.
>
Marek told me he wants some more time to review on his side, so please wait
before push through MFD! :)

Best regards,

Cyrille

\
 
 \ /
  Last update: 2016-11-22 11:21    [W:0.055 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site