lkml.org 
[lkml]   [2016]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] ARM64: dts: Add support for Meson GXM
From
Date
On 11/22/2016 12:42 AM, Kevin Hilman wrote:
> Neil,
>
> Neil Armstrong <narmstrong@baylibre.com> writes:
>
>> Following the Amlogic Linux kernel, it seem the only differences
>> between the GXL and GXM SoCs are the CPU Clusters.
>>
>> This commit renames the gxl-s905d-p23x DTSI in a common file for
>> S905D p20x and S912 q20x boards.
>
> s/p20x/p23x/ ??
>
>> Then adds a meson-gxm dtsi and reproduce the P23x to Q20x boards
>> dts files since the S905D and S912 SoCs shares the same pinout
>> and the P23x and Q20x boards are identical.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>
> I had to drop this as it breaks the network on (at least) gxbb-p200, but...
>
> [...]
>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
>> index 03e3d76..17bb77c 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
>> @@ -56,3 +56,22 @@
>> pinctrl-0 = <&i2c_b_pins>;
>> pinctrl-names = "default";
>> };
>> +
>> +&ethmac {
>> + status = "okay";
>> + pinctrl-0 = <&eth_rgmii_pins>;
>> + pinctrl-names = "default";
>> +
>> + phy-handle = <&eth_phy0>;
>> +
>> + mdio {
>> + compatible = "snps,dwmac-mdio";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + eth_phy0: ethernet-phy@0 {
>> + reg = <0>;
>> + realtek,disable-eee-1000t;
>> + };
>> + };
>> +};
>
> ... backing out this change makes it work again.
>
> This change also looks suspicious as it's using the proposed disable-eee
> properties, which I don't think have been merged yet.
>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
>> index 39bb037..5608c51 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
>> @@ -50,3 +50,10 @@
>> compatible = "amlogic,p201", "amlogic,meson-gxbb";
>> model = "Amlogic Meson GXBB P201 Development Board";
>> };
>> +
>> +&ethmac {
>> + status = "okay";
>> + pinctrl-0 = <&eth_rmii_pins>;
>> + pinctrl-names = "default";
>> + phy-mode = "rmii";
>> +};
>
> This also doesn't look releveant to the GXL/GXM changes being introduced
> in this patch.
>
> Could you separate out any GXBB-related changes into a separate patch
> (if they are in fact needed) and re-spin this?
>
> Thanks,
>
> Kevin
>

Sorry leftover for another work...

Will cleanup for v2.

Neil

\
 
 \ /
  Last update: 2016-11-22 10:48    [W:0.049 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site