lkml.org 
[lkml]   [2016]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] HID: i2c-hid: retrieve the GPIO parameters only when unset
Date
Instead of forcing the level triggers of the IRQ,
we can count on ACPI or OF to set it up for us.

This way, if some vendor decides to not follow the spec, well
we can handle those case (I have been requested this once already).

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---

Hi Jiri,

I have been requested this once. I was not sure whether it was doable at the
time, but it actually appears that both ACPI and OF sets the irqflags for us.

So I think it would be good to trust the device description instead of
blindly overwriting it.

Cheers,
Benjamin

drivers/hid/i2c-hid/i2c-hid.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index ce51879..0630499 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -858,13 +858,16 @@ static struct hid_ll_driver i2c_hid_ll_driver = {
static int i2c_hid_init_irq(struct i2c_client *client)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
+ unsigned long irqflags = 0;
int ret;

dev_dbg(&client->dev, "Requesting IRQ: %d\n", client->irq);

+ if (!irq_get_trigger_type(client->irq))
+ irqflags = IRQF_TRIGGER_LOW;
+
ret = request_threaded_irq(client->irq, NULL, i2c_hid_irq,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- client->name, ihid);
+ irqflags | IRQF_ONESHOT, client->name, ihid);
if (ret < 0) {
dev_warn(&client->dev,
"Could not register for %s interrupt, irq = %d,"
--
2.7.4
\
 
 \ /
  Last update: 2016-11-21 12:51    [W:0.028 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site