lkml.org 
[lkml]   [2016]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/4] spi: spi-fsl-dspi: Fix continuous selection format
Date
Current DMA implementation was not handling the continuous selection
format viz. SPI chip select would be deasserted even between sequential
serial transfers. Use the cs_change variable and correctly set or
reset the CONT bit accordingly for case where peripherals require
the chip select to be asserted between sequential transfers.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
drivers/spi/spi-fsl-dspi.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index b1ee1f5..41422cd 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -261,6 +261,8 @@ static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
dspi->dma->tx_dma_buf[i] = SPI_PUSHR_TXDATA(val) |
SPI_PUSHR_PCS(dspi->cs) |
SPI_PUSHR_CTAS(0);
+ if (!dspi->cs_change)
+ dspi->dma->tx_dma_buf[i] |= SPI_PUSHR_CONT;
dspi->tx += tx_word + 1;

dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx,
--
2.10.2
\
 
 \ /
  Last update: 2016-11-21 07:04    [W:0.191 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site