lkml.org 
[lkml]   [2016]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 11/14] ACPI: irq: introduce interrupt producer
Hi Agustin,

Sorry for the late reply, on travailing for now.

On 10/29/2016 03:32 AM, agustinv@codeaurora.org wrote:
> Hey Hanjun,
>
> On 2016-10-25 11:09, Hanjun Guo wrote:
>> From: Hanjun Guo <hanjun.guo@linaro.org>
>>
>> In ACPI 6.1 spec, section 19.6.62, Interrupt Resource Descriptor Macro,
>>
>> Interrupt (ResourceUsage, EdgeLevel, ActiveLevel, Shared,
>> ResourceSourceIndex, ResourceSource, DescriptorName)
>> { InterruptList } => Buffer
>>
>> For the arguement ResourceUsage and DescriptorName, which means:
>>
>> ResourceUsage describes whether the device consumes the specified
>> interrupt ( ResourceConsumer ) or produces it for use by a child
>> device ( ResourceProducer ).
>> If nothing is specified, then ResourceConsumer is assumed.
>>
>> DescriptorName evaluates to a name string which refers to the
>> entire resource descriptor.
>>
>> So it can be used for devices connecting to a specific interrupt
>> prodcucer instead of the main interrupt controller in MADT. In the
>> real world, we have irqchip such as mbi-gen which connecting to
>> a group of wired interrupts and then issue msi to the ITS, devices
>> connecting to such interrupt controller fit this scope.
>>
>> For now the irq for ACPI only pointer to the main interrupt
>> controller's irqdomain, for devices not connecting to those
>> irqdomains, which need to present its irq parent, we can use
>> following ASL code to represent it:
>>
>> Interrupt(ResourceConsumer,..., "\_SB.IRQP") {12,14,....}
>>
>> then we can parse the interrupt producer with the full
>> path name "\_SB.IRQP".
>>
>> In order to do that, we introduce a pointer interrupt_producer
>> in struct acpi_device, and fill it when scanning irq resources
>> for acpi device if it specifies the interrupt producer.
>>
>> But for now when parsing the resources for acpi devices, we don't
>> pass the acpi device for acpi_walk_resoures() in drivers/acpi/resource.c,
>> so introduce a adev in struct res_proc_context to pass it as a context
>> to scan the interrupt resources, then finally pass to acpi_register_gsi()
>> to find its interrupt producer to get the virq from diffrent domains.
>>
>> With steps above ready, rework acpi_register_gsi() to get other
>> interrupt producer if devices not connecting to main interrupt
>> controller.
>>
>> Since we often pass NULL to acpi_register_gsi() and there is no interrupt
>> producer for devices connect to gicd on ARM or io-apic on X86, so it will
>> use the default irqdomain for those deivces and no functional changes to
>> those devices.
>>
>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>> Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
>> Cc: Marc Zyngier <marc.zyngier@arm.com>
>> Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
>> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>> ---
>> drivers/acpi/gsi.c | 10 ++++--
>> drivers/acpi/resource.c | 85
>> ++++++++++++++++++++++++++++++++++---------------
>> include/acpi/acpi_bus.h | 1 +
>> 3 files changed, 68 insertions(+), 28 deletions(-)
>>
>> diff --git a/drivers/acpi/gsi.c b/drivers/acpi/gsi.c
>> index ee9e0f2..29ee547 100644
>> --- a/drivers/acpi/gsi.c
>> +++ b/drivers/acpi/gsi.c
>> @@ -55,13 +55,19 @@ int acpi_register_gsi(struct device *dev, u32 gsi,
>> int trigger,
>> int polarity)
>> {
>> struct irq_fwspec fwspec;
>> + struct acpi_device *adev = dev ? to_acpi_device(dev) : NULL;
>>
>> - if (WARN_ON(!acpi_gsi_domain_id)) {
>> + if (adev && &adev->fwnode && adev->interrupt_producer)
>> + /* devices in DSDT connecting to spefic interrupt producer */
>> + fwspec.fwnode = adev->interrupt_producer;
>> + else if (acpi_gsi_domain_id)
>> + /* devices connecting to gicd in default */
>> + fwspec.fwnode = acpi_gsi_domain_id;
>> + else {
>> pr_warn("GSI: No registered irqchip, giving up\n");
>> return -EINVAL;
>> }
>>
>> - fwspec.fwnode = acpi_gsi_domain_id;
>> fwspec.param[0] = gsi;
>> fwspec.param[1] = acpi_dev_get_irq_type(trigger, polarity);
>> fwspec.param_count = 2;
>> diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
>> index 56241eb..f1371cf 100644
>> --- a/drivers/acpi/resource.c
>> +++ b/drivers/acpi/resource.c
>> @@ -381,7 +381,7 @@ static void acpi_dev_irqresource_disabled(struct
>> resource *res, u32 gsi)
>> res->flags = IORESOURCE_IRQ | IORESOURCE_DISABLED |
>> IORESOURCE_UNSET;
>> }
>>
>> -static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
>> +static void acpi_dev_get_irqresource(struct acpi_device *adev, struct
>> resource *res, u32 gsi,
>> u8 triggering, u8 polarity, u8 shareable,
>> bool legacy)
>> {
>> @@ -415,7 +415,7 @@ static void acpi_dev_get_irqresource(struct
>> resource *res, u32 gsi,
>> }
>>
>> res->flags = acpi_dev_irq_flags(triggering, polarity, shareable);
>> - irq = acpi_register_gsi(NULL, gsi, triggering, polarity);
>> + irq = acpi_register_gsi(&adev->dev, gsi, triggering, polarity);
>> if (irq >= 0) {
>> res->start = irq;
>> res->end = irq;
>> @@ -424,27 +424,9 @@ static void acpi_dev_get_irqresource(struct
>> resource *res, u32 gsi,
>> }
>> }
>>
>> -/**
>> - * acpi_dev_resource_interrupt - Extract ACPI interrupt resource
>> information.
>> - * @ares: Input ACPI resource object.
>> - * @index: Index into the array of GSIs represented by the resource.
>> - * @res: Output generic resource object.
>> - *
>> - * Check if the given ACPI resource object represents an interrupt
>> resource
>> - * and @index does not exceed the resource's interrupt count (true is
>> returned
>> - * in that case regardless of the results of the other checks)). If
>> that's the
>> - * case, register the GSI corresponding to @index from the array of
>> interrupts
>> - * represented by the resource and populate the generic resource
>> object pointed
>> - * to by @res accordingly. If the registration of the GSI is not
>> successful,
>> - * IORESOURCE_DISABLED will be set it that object's flags.
>> - *
>> - * Return:
>> - * 1) false with res->flags setting to zero: not the expected
>> resource type
>> - * 2) false with IORESOURCE_DISABLED in res->flags: valid unassigned
>> resource
>> - * 3) true: valid assigned resource
>> - */
>> -bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
>> - struct resource *res)
>> +static bool __acpi_dev_resource_interrupt(struct acpi_device *adev,
>> + struct acpi_resource *ares, int index,
>> + struct resource *res)
>> {
>> struct acpi_resource_irq *irq;
>> struct acpi_resource_extended_irq *ext_irq;
>> @@ -460,7 +442,7 @@ bool acpi_dev_resource_interrupt(struct
>> acpi_resource *ares, int index,
>> acpi_dev_irqresource_disabled(res, 0);
>> return false;
>> }
>> - acpi_dev_get_irqresource(res, irq->interrupts[index],
>> + acpi_dev_get_irqresource(adev, res, irq->interrupts[index],
>> irq->triggering, irq->polarity,
>> irq->sharable, true);
>> break;
>> @@ -470,7 +452,31 @@ bool acpi_dev_resource_interrupt(struct
>> acpi_resource *ares, int index,
>> acpi_dev_irqresource_disabled(res, 0);
>> return false;
>> }
>> - acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
>> +
>> + /*
>> + * It's a interrupt consumer device and connecting to specfic
>> + * interrupt controller. For now, we only support connecting
>> + * interrupts to one irq controller for a single device
>> + */
>> + if (ext_irq->producer_consumer == ACPI_CONSUMER
>> + && ext_irq->resource_source.string_length != 0
>> + && !adev->interrupt_producer) {
>> + acpi_status status;
>> + acpi_handle handle;
>> + struct acpi_device *device;
>> +
>> + status = acpi_get_handle(NULL,
>> ext_irq->resource_source.string_ptr, &handle);
>> + if (ACPI_FAILURE(status))
>> + return false;
>> +
>> + device = acpi_bus_get_acpi_device(handle);
>> + if (!device)
>> + return false;
>> +
>> + adev->interrupt_producer = &device->fwnode;
>
> You are missing an 'acpi_bus_put_acpi_device(device)' call here.

good catch!

>
> Besides that, this approach will not work in the case where a device
> wants to consume interrupts from multiple controllers since you are
> forcing adev->interrupt_producer to be the first resource_source
> found.

Yes, you are right, and it's in the comment of the code, we
can fix that to add some extra code.

>
> That's the reason I was advocating dynamic lookup (see [1]).
>
> I am about to submit V6 of my series where I also address the probe
> ordering issues by enabling re-initialization of platform_device
> resources when the resource was marked disabled due to the domain
> nor being there during ACPI bus scan.

I will take a deep look for your v6 patch set, probably we can
work together to get things down.

Thanks
Hanjun

\
 
 \ /
  Last update: 2016-11-02 22:09    [W:0.484 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site