lkml.org 
[lkml]   [2016]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/3] spi-nor: Add support for Intel SPI serial flash controller
On Sat, 19 Nov 2016 09:35:46 +0200
Mika Westerberg <mika.westerberg@linux.intel.com> wrote:

> On Fri, Nov 18, 2016 at 07:04:26PM +0000, Lee Jones wrote:
> > On Mon, 14 Nov 2016, Mika Westerberg wrote:
> >
> > > This is fifth version of the series. You can find the previous versions
> > > archived on:
> > >
> > > v4: https://lwn.net/Articles/703773/
> > > v3: https://lwn.net/Articles/697231/
> > > v2: http://lists.infradead.org/pipermail/linux-mtd/2016-June/068277.html
> > > v1: https://lkml.org/lkml/2016/6/14/269
> > >
> > > This patch series adds support for the Intel SPI serial flash controller
> > > found on many recent Intel CPUs including Baytrail and Braswell. This
> > > driver makes it possible to access the BIOS and other platform data which
> > > is stored on the SPI serial flash. It is also possible to upgrade the BIOS
> > > using this driver if it has not been protected by special hardware bits.
> > >
> > > The patch [1/3] includes documentation how to upgrade BIOS on MinnowBoard
> > > MAX.
> > >
> > > Since poking the SPI serial flash can brick the machine, this driver can
> > > only be enabled when CONFIG_EXPERT=y and even then it will remain read-only
> > > unless instructed othwerwise by module parameter.
> > >
> > > Changes from v4:
> > > * Use INTEL_SPI_FIFO_SZ instead of hard coded value of 64 bytes
> > > * Don't increment i inside call to FDATA() macro
> > > * Check nor->read_opcode in intel_spi_read() and return
> > > -EINVAL if not supported. We may add SFDP support later on.
> > >
> > > Changes from v3:
> > > * Added ACKs from Lee Jones.
> > > * Use bus instead of dev->bus in PCI accesses
> > >
> > > Changes from v2:
> > > * Rebased on top of v4.8-rc2
> > > * Updated intel_spi_read/write() according spi-nor core changes which
> > > drops retlen parameter and returns number of bytes read/written.
> > >
> > > Changes from v1:
> > > * Older hardware does not support 64k erase command so added erase_64k
> > > flag which is set only for Broxton (BXT).
> > > * Fix protection range offset for Broxton. Now there is ispi->pregs
> > > pointing to the start of the protection registers.
> > > * Change naming of constants from BCR_BYT -> BYT_BCR and so on.
> > > * Drop lpc_ich_finalize_spi_cell() and initialize cell directly in
> > > lpc_ich_init_spi().
> > > * Use info->type in switch in lpc_ich_init_spi().
> > > * Add defines for magic numbers used in lpc_ich_init_spi().
> > > * Use PLATFORM_DEVID_NONE with mfd_add_devices().
> > >
> > > Mika Westerberg (3):
> > > spi-nor: Add support for Intel SPI serial flash controller
> > > mfd: lpc_ich: Add support for SPI serial flash host controller
> > > mfd: lpc_ich: Add support for Intel Apollo Lake SoC
> >
> > What's the plan for this set?
>
> I was hoping to get this merged via MTD tree but I haven't got much
> comments from the maintainers. No idea if anyone is going to take this :-(

Marek, Cyrille, can you take a look?

\
 
 \ /
  Last update: 2016-11-19 09:04    [W:0.095 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site