lkml.org 
[lkml]   [2016]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: sunxi: Explicitly enable pull-ups for MMC pins
On Thu, Nov 17, 2016 at 05:34:38PM +0800, Chen-Yu Tsai wrote:
> In the past, all the MMC pins had
>
> allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>
> which was actually a no-op. We were relying on U-boot to set the bias
> pull up for us. These properties were removed as part of the fix up to
> actually support no bias on the pins. During the transition some boards
> experienced regular MMC time-outs during normal operation, while others
> completely failed to initialize the SD card.
>
> Given that MMC starts in open-drain mode and the pull-ups are required,
> it's best to enable it for all the pin settings.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Applied, thanks.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-11-17 21:41    [W:0.044 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site