lkml.org 
[lkml]   [2016]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] hwmon: ltc2990: support all measurement modes
On Thu, Nov 17, 2016 at 06:40:17PM +0100, Mike Looijmans wrote:
> On 17-11-16 17:56, Guenter Roeck wrote:
> >On 11/17/2016 04:10 AM, Tom Levens wrote:
> >>Updated version of the ltc2990 driver which supports all measurement
> >>modes available in the chip. The mode can be set through a devicetree
> >>attribute.
> >
[ ... ]

> >>
> >> static int ltc2990_i2c_probe(struct i2c_client *i2c,
> >> const struct i2c_device_id *id)
> >> {
> >> int ret;
> >> struct device *hwmon_dev;
> >>+ struct ltc2990_data *data;
> >>+ struct device_node *of_node = i2c->dev.of_node;
> >>
> >> if (!i2c_check_functionality(i2c->adapter,
> >>I2C_FUNC_SMBUS_BYTE_DATA |
> >> I2C_FUNC_SMBUS_WORD_DATA))
> >> return -ENODEV;
> >>
> >>- /* Setup continuous mode, current monitor */
> >>+ data = devm_kzalloc(&i2c->dev, sizeof(struct ltc2990_data),
> >>GFP_KERNEL);
> >>+ if (unlikely(!data))
> >>+ return -ENOMEM;
> >>+ data->i2c = i2c;
> >>+
> >>+ if (!of_node || of_property_read_u32(of_node, "lltc,mode",
> >>&data->mode))
> >>+ data->mode = LTC2990_CONTROL_MODE_DEFAULT;
> >
> >Iam arguing with myself if we should still do this or if we should read
> >the mode
> >from the chip instead if it isn't provided (after all, it may have been
> >initialized
> >by the BIOS/ROMMON).
>
> I think the mode should be explicitly set, without default. There's no way
> to tell whether the BIOS or bootloader has really set it up or whether the
> chip is just reporting whatever it happened to default to. And given the
> chip's function, it's unlikely a bootloader would want to initialize it.
>
Unlikely but possible. Even if we all agree that the chip should be configured
by the driver, I don't like imposing that view on everyone else.

> My advice would be to make it a required property. If not set, display an
> error and bail out.
>
It is not that easy, unfortunately. It also has to work on a non-devicetree
system. I would not object to making the property mandatory, but we would
still need to provide non-DT support.

My "use case" for taking the current mode from the chip if not specified
is that it would enable me to run a module test with all modes. I consider
this extremely valuable.

> >Mike, would that break your application, or can you specify the mode in
> >devicetree ?
>
> I'm fine with specifying this in the devicetree. It will break things for
> me, but I've been warned and willing to bow for the greater good :)
>
I should have asked if your system uses devicetree. If it does, the problem
should be easy to fix for you. If not, we'll need to find a solution
for your use case.

Thanks,
Guenter

\
 
 \ /
  Last update: 2016-11-17 19:57    [W:0.051 / U:1.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site