lkml.org 
[lkml]   [2016]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] dt-bindings: max77620: add documentation for MPOK property
Date
Adding documentation for maxim,power-ok-control dts property

Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>

---
Changes from V1:
None
---
Documentation/devicetree/bindings/mfd/max77620.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
index 2ad44f7..9c16d51 100644
--- a/Documentation/devicetree/bindings/mfd/max77620.txt
+++ b/Documentation/devicetree/bindings/mfd/max77620.txt
@@ -106,6 +106,18 @@ Here supported time periods by device in microseconds are as follows:
MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds.
MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.

+-maxim,power-ok-control: configure map power ok bit
+ 1: Enables POK(Power OK) to control nRST_IO and GPIO1
+ POK function.
+ 0: Disables POK control.
+ if property missing, do not configure MPOK bit.
+ If POK mapping is enabled for GPIO1/nRST_IO then,
+ GPIO1/nRST_IO pins are HIGH only if all rails
+ that have POK control enabled are HIGH.
+ If any of the rails goes down(which are enabled for POK
+ control) then, GPIO1/nRST_IO goes LOW.
+ this property is valid for max20024 only.
+
For DT binding details of different sub modules like GPIO, pincontrol,
regulator, power, please refer respective device-tree binding document
under their respective sub-system directories.
--
2.1.4
\
 
 \ /
  Last update: 2016-11-17 19:07    [W:0.909 / U:1.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site