lkml.org 
[lkml]   [2016]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/2] mailbox: Add Tegra HSP driver
On Wed, Nov 16, 2016 at 8:38 PM, Thierry Reding
<thierry.reding@gmail.com> wrote:
> On Wed, Nov 16, 2016 at 10:58:07AM +0530, Jassi Brar wrote:
>> On Tue, Nov 15, 2016 at 9:18 PM, Thierry Reding
>> <thierry.reding@gmail.com> wrote:
>>
>> ....
>> > +
>> > +struct tegra_hsp_channel;
>> > +struct tegra_hsp;
>> > +
>> > +struct tegra_hsp_channel_ops {
>> > + int (*send_data)(struct tegra_hsp_channel *channel, void *data);
>> > + int (*startup)(struct tegra_hsp_channel *channel);
>> > + void (*shutdown)(struct tegra_hsp_channel *channel);
>> > + bool (*last_tx_done)(struct tegra_hsp_channel *channel);
>> > +};
>> > +
>> > +struct tegra_hsp_channel {
>> > + struct tegra_hsp *hsp;
>> > + const struct tegra_hsp_channel_ops *ops;
>> > + struct mbox_chan *chan;
>> > + void __iomem *regs;
>> > +};
>> > +
>> > +static struct tegra_hsp_channel *to_tegra_hsp_channel(struct mbox_chan *chan)
>> > +{
>> > + return chan->con_priv;
>> > +}
>> > +
>> It seems
>> channel = to_tegra_hsp_channel(chan);
>> is no simpler ritual than
>> channel = chan->con_priv; ?
>
> Yes, that's true. I've dropped the to_tegra_hsp_channel() inline in
> favour of using the chan->con_priv directly.
>
>> > +struct tegra_hsp_doorbell {
>> > + struct tegra_hsp_channel channel;
>> > + struct list_head list;
>> > + const char *name;
>> > + unsigned int master;
>> > + unsigned int index;
>> > +};
>> > +
>> > +static struct tegra_hsp_doorbell *
>> > +to_tegra_hsp_doorbell(struct tegra_hsp_channel *channel)
>> > +{
>> > + if (!channel)
>> > + return NULL;
>> > +
>> > + return container_of(channel, struct tegra_hsp_doorbell, channel);
>> > +}
>> > +
>> But you don't check for NULL returned, before dereferencing the pointer 'db'
>
> In all the call sites where this is used the channel is guaranteed not
> to be NULL, hence no checking is necessary. However the function here
> could potentially be used in other cases where no such guarantees can
> be given and checking the !channel above is merely there to avoid
> casting to a non-NULL pointer from a NULL pointer.
>
> I've run occasionally into this issue because container_of() will simply
> perform arithmetic on the pointer given, so passing channel as NULL
> would convert to some very large pointer that can no longer be easily
> discerned from an invalid pointer.
>
> So this is primarily a safety feature, and one that I'd prefer to keep
> just to avoid running into issues down the road when the function gets
> used under different circumstances.
>
>> > +static bool tegra_hsp_doorbell_last_tx_done(struct tegra_hsp_channel *channel)
>> > +{
>> > + return true;
>> > +}
>> Just curious, is the IPC done instantly after writing HSP_DB_TRIGGER
>> bit? Usually there is at least some bit that stays (un)set as a 'busy
>> flag'.
>
> I don't think there's a bit like that for doorbells. The way that these
> doorbells are used is in combination with a shared memory IPC protocol.
> Two processors will communicate by writing to and reading from what is
> essentially a ring buffer in shared memory. The doorbells are merely a
> means of communicating their peer that a new entry is available in the
> shared memory.
>
For such protocols, we have the TXDONE_BY_ACK. I assume your client
drivers will drive the state-machine. Otherwise, you risk overrunning
the ring-buffer in SHM, but not caring if the first filled buffer was
actually consumed by the remote (just like ALSA ring buffer).

>> > +static const struct tegra_hsp_channel_ops tegra_hsp_doorbell_ops = {
>> > + .send_data = tegra_hsp_doorbell_send_data,
>> > + .startup = tegra_hsp_doorbell_startup,
>> > + .shutdown = tegra_hsp_doorbell_shutdown,
>> > + .last_tx_done = tegra_hsp_doorbell_last_tx_done,
>> > +};
>> > +
>> ....
>>
>> > +static int tegra_hsp_send_data(struct mbox_chan *chan, void *data)
>> > +{
>> > + struct tegra_hsp_channel *channel = to_tegra_hsp_channel(chan);
>> > +
>> > + return channel->ops->send_data(channel, data);
>> > +}
>> > +
>> > +static int tegra_hsp_startup(struct mbox_chan *chan)
>> > +{
>> > + struct tegra_hsp_channel *channel = to_tegra_hsp_channel(chan);
>> > +
>> > + return channel->ops->startup(channel);
>> > +}
>> > +
>> > +static void tegra_hsp_shutdown(struct mbox_chan *chan)
>> > +{
>> > + struct tegra_hsp_channel *channel = to_tegra_hsp_channel(chan);
>> > +
>> > + return channel->ops->shutdown(channel);
>> > +}
>> > +
>> > +static bool tegra_hsp_last_tx_done(struct mbox_chan *chan)
>> > +{
>> > + struct tegra_hsp_channel *channel = to_tegra_hsp_channel(chan);
>> > +
>> > + return channel->ops->last_tx_done(channel);
>> > +}
>> > +
>> > +static const struct mbox_chan_ops tegra_hsp_ops = {
>> > + .send_data = tegra_hsp_send_data,
>> > + .startup = tegra_hsp_startup,
>> > + .shutdown = tegra_hsp_shutdown,
>> > + .last_tx_done = tegra_hsp_last_tx_done,
>> > +};
>> > +
>> These 4 above seem overkill. Why not directly use tegra_hsp_doorbell_xxx() ?
>
> This is in preparation for supporting the other synchronization
> primitives that the HSP IP block exposes. Some of them use different
> programming and semantics, hence why we want to have this second level
> of abstraction. It will allow us to share some of the code between the
> different primitives once their implementations are added.
>
OK, but until then this, and the above NULL check, will look silly.
Usually we add only necessary code at any time.

Thanks.

\
 
 \ /
  Last update: 2016-11-16 16:31    [W:0.085 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site