lkml.org 
[lkml]   [2016]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/4] DW DMAC: add hw-llp property to device tree
From
Date
On Wed, 2016-11-16 at 16:56 +0300, Eugeniy Paltsev wrote:
> Several versions of DW DMAC have multi block transfers hardware
> support. Hardware support of multi block transfers is disabled
> by default if we use DT to configure DMAC and software emulation
> of multi block transfers used instead.
> Add hw-llp property, so it is possible to enable hardware
> multi block transfers (if present) via DT.

You forgot to explain the conversion from per device value to per
channel one.

>
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> ---
>  drivers/dma/dw/core.c                | 2 +-
>  drivers/dma/dw/platform.c            | 5 +++++
>  include/linux/platform_data/dma-dw.h | 4 ++--
>  3 files changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
> index c2c0a61..e3ff4ea 100644
> --- a/drivers/dma/dw/core.c
> +++ b/drivers/dma/dw/core.c
> @@ -1569,7 +1569,7 @@ int dw_dma_probe(struct dw_dma_chip *chip)
>   (dwc_params >> DWC_PARAMS_MBLK_EN &
> 0x1) == 0;
>   } else {
>   dwc->block_size = pdata->block_size;
> - dwc->nollp = pdata->is_nollp;
> + dwc->nollp = pdata->hw_llp[i];
>   }
>   }
>  
> diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
> index daeceac..2722e60 100644
> --- a/drivers/dma/dw/platform.c
> +++ b/drivers/dma/dw/platform.c
> @@ -151,6 +151,11 @@ dw_dma_parse_dt(struct platform_device *pdev)
>   pdata->data_width[tmp] = BIT(arr[tmp] &
> 0x07);
>   }
>  
> + if (!of_property_read_u32_array(np, "hw-llp", arr,
> nr_masters)) {
> + for (tmp = 0; tmp < nr_masters; tmp++)
> + pdata->hw_llp[tmp] = arr[tmp];
> + }
> +
>   return pdata;
>  }
>  #else
> diff --git a/include/linux/platform_data/dma-dw.h
> b/include/linux/platform_data/dma-dw.h
> index 5f0e11e..5bc8124 100644
> --- a/include/linux/platform_data/dma-dw.h
> +++ b/include/linux/platform_data/dma-dw.h
> @@ -40,19 +40,18 @@ struct dw_dma_slave {
>   * @is_private: The device channels should be marked as private and
> not for
>   * by the general purpose DMA channel allocator.
>   * @is_memcpy: The device channels do support memory-to-memory
> transfers.
> - * @is_nollp: The device channels does not support multi block
> transfers.
>   * @chan_allocation_order: Allocate channels starting from 0 or 7
>   * @chan_priority: Set channel priority increasing from 0 to 7 or 7
> to 0.
>   * @block_size: Maximum block size supported by the controller
>   * @nr_masters: Number of AHB masters supported by the controller
>   * @data_width: Maximum data width supported by hardware per AHB
> master
>   * (in bytes, power of 2)
> + * @hw_llp: Multi block transfers supported by hardware per AHB
> master.
>   */
>  struct dw_dma_platform_data {
>   unsigned int nr_channels;
>   bool is_private;
>   bool is_memcpy;
> - bool is_nollp;
>  #define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */
>  #define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero
> */
>   unsigned char chan_allocation_order;
> @@ -62,6 +61,7 @@ struct dw_dma_platform_data {
>   unsigned int block_size;
>   unsigned char nr_masters;
>   unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
> + unsigned char hw_llp[DW_DMA_MAX_NR_MASTERS];
>  };
>  
>  #endif /* _PLATFORM_DATA_DMA_DW_H */

--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

\
 
 \ /
  Last update: 2016-11-16 16:15    [W:1.434 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site