lkml.org 
[lkml]   [2016]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mxs-auart: count FIFO overrun errors
On Tue, Nov 15, 2016 at 12:05:29PM +0100, Wolfgang Ocker wrote:
> The mxs-auart driver does not count FIFO overrun errors. These errors never
> appear in /proc/tty/driver/ttyAPP. This is because the OERR status bit is
> masked by read_status_mask in the rx interrupt function, but the
> AUART_STAT_OERR bit is never set in read_status_mask. The patch enables the
> counting of overrun errors.
>
> Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
> ---
>  drivers/tty/serial/mxs-auart.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
> index 770454e0dfa3..8c1c9112b3fd 100644
> --- a/drivers/tty/serial/mxs-auart.c
> +++ b/drivers/tty/serial/mxs-auart.c
> @@ -1016,7 +1016,7 @@ static void mxs_auart_settermios(struct uart_port *u,
>   ctrl |= AUART_LINECTRL_EPS;
>   }
>  
> - u->read_status_mask = 0;
> + u->read_status_mask = AUART_STAT_OERR;
>  
>   if (termios->c_iflag & INPCK)
>   u->read_status_mask |= AUART_STAT_PERR;
> -- 
> 2.10.0

This patch is corrupted and can not be applied, what did you do here?

Please fix up and resend.

thanks,

greg k-h

\
 
 \ /
  Last update: 2016-11-16 10:58    [W:0.042 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site