lkml.org 
[lkml]   [2016]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [net-next 1/2] net: ethernet: slicoss: add slicoss gigabit ethernet driver
> >>>>> +  			val = MII_BMCR << 16 | SLIC_PCR_AUTONEG |
> >>>>> + SLIC_PCR_AUTONEG_RST;
> >>>>> + slic_write(sdev, SLIC_REG_WPHY, val);

> Thats essentially what I meant by setting a flag in the irq handler. The mdio
> function would have to check somehow if the irq has been fired (be it by means
> of a flag or a completion that is set by the irq handler and checked by the
> mdio function). So I agree that it should work (if reading via the AP command
> is actually possible).

It seems odd you have a nice simple way to do writes, but reads are
very complex. There might be a simple read method hiding somewhere.

Andrew

\
 
 \ /
  Last update: 2016-11-16 00:04    [W:0.041 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site