lkml.org 
[lkml]   [2016]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V1 0/2] Add support for ThunderX SoCs ACPI Host Controllers
Date
These patches were part of https://lkml.org/lkml/2016/9/9/666 series,
however, only core part (first two patches) was approved. ThunderX quirk
example had some comments which are address in this series (resetting version
numbering).

Add ACPI PCI host controler support for ThunderX SoCs pass1.x & pass2.x using
ACPI quirk mechanism [1]. Patches rework ThunderX ECAM and PEM driver to work
with ACPI & DT boot method.

Patch set can be found here:
git@github.com:semihalf-nowicki-tomasz/linux.git (pci-quirks-thunderx-v1)
It is based on branch pci/ecam-v6 which can be found here:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git (pci/ecam-v6)

Tomasz Nowicki (2):
PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x silicon
version
PCI: thunder: Enable ACPI PCI controller for ThunderX pass1.x silicon
version

drivers/acpi/pci_mcfg.c | 35 ++++++++++++
drivers/pci/host/pci-thunder-ecam.c | 2 +-
drivers/pci/host/pci-thunder-pem.c | 107 +++++++++++++++++++++++++++++++-----
include/linux/pci-ecam.h | 7 +++
4 files changed, 136 insertions(+), 15 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2016-11-15 10:17    [W:0.143 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site