lkml.org 
[lkml]   [2016]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3.2 007/152] usb: renesas_usbhs: protect the CFIFOSEL setting in usbhsg_ep_enable()
3.2.84-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit 15e4292a2d21e9997fdb2b8c014cc461b3f268f0 upstream.

This patch fixes an issue that the CFIFOSEL register value is possible
to be changed by usbhsg_ep_enable() wrongly. And then, a data transfer
using CFIFO may not work correctly.

For example:
# modprobe g_multi file=usb-storage.bin
# ifconfig usb0 192.168.1.1 up
(During the USB host is sending file to the mass storage)
# ifconfig usb0 down

In this case, since the u_ether.c may call usb_ep_enable() in
eth_stop(), if the renesas_usbhs driver is also using CFIFO for
mass storage, the mass storage may not work correctly.

So, this patch adds usbhs_lock() and usbhs_unlock() calling in
usbhsg_ep_enable() to protect CFIFOSEL register. This is because:
- CFIFOSEL.CURPIPE = 0 is also needed for the pipe configuration
- The CFIFOSEL (fifo->sel) is already protected by usbhs_lock()

Fixes: 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/renesas_usbhs/mod_gadget.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -472,6 +472,9 @@ static int usbhsg_ep_enable(struct usb_e
struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
struct usbhs_pipe *pipe;
int ret = -EIO;
+ unsigned long flags;
+
+ usbhs_lock(priv, flags);

/*
* if it already have pipe,
@@ -480,7 +483,8 @@ static int usbhsg_ep_enable(struct usb_e
if (uep->pipe) {
usbhs_pipe_clear(uep->pipe);
usbhs_pipe_sequence_data0(uep->pipe);
- return 0;
+ ret = 0;
+ goto usbhsg_ep_enable_end;
}

pipe = usbhs_pipe_malloc(priv,
@@ -508,6 +512,9 @@ static int usbhsg_ep_enable(struct usb_e
ret = 0;
}

+usbhsg_ep_enable_end:
+ usbhs_unlock(priv, flags);
+
return ret;
}

\
 
 \ /
  Last update: 2016-11-14 04:12    [W:0.582 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site