lkml.org 
[lkml]   [2016]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 07/26] staging: iio: tsl2583: cleaned up logging
From
Date
On 12/11/16 18:19, Brian Masney wrote:
> There are several places in the code where the function name is
> hardcoded in the log message. Use the __func__ constant string to build
> the log message. This also clarifies some of the error messages to match
> the code and ensures that the correct priority is used since the message
> is already being changed.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
Applied.
> ---
> drivers/staging/iio/light/tsl2583.c | 73 ++++++++++++++++++++++---------------
> 1 file changed, 43 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
> index 57279f7..5d74e0c1 100644
> --- a/drivers/staging/iio/light/tsl2583.c
> +++ b/drivers/staging/iio/light/tsl2583.c
> @@ -170,13 +170,15 @@ static int taos_get_lux(struct iio_dev *indio_dev)
>
> ret = i2c_smbus_read_byte_data(chip->client, TSL258X_CMD_REG);
> if (ret < 0) {
> - dev_err(&chip->client->dev, "taos_get_lux failed to read CMD_REG\n");
> + dev_err(&chip->client->dev, "%s: failed to read CMD_REG register\n",
> + __func__);
> goto done;
> }
>
> /* is data new & valid */
> if (!(ret & TSL258X_STA_ADC_INTR)) {
> - dev_err(&chip->client->dev, "taos_get_lux data not valid\n");
> + dev_err(&chip->client->dev, "%s: data not valid; returning last value\n",
> + __func__);
> ret = chip->als_cur_info.lux; /* return LAST VALUE */
> goto done;
> }
> @@ -186,9 +188,8 @@ static int taos_get_lux(struct iio_dev *indio_dev)
>
> ret = i2c_smbus_read_byte_data(chip->client, reg);
> if (ret < 0) {
> - dev_err(&chip->client->dev,
> - "taos_get_lux failed to read register %x\n",
> - reg);
> + dev_err(&chip->client->dev, "%s: failed to read register %x\n",
> + __func__, reg);
> goto done;
> }
> buf[i] = ret;
> @@ -203,9 +204,8 @@ static int taos_get_lux(struct iio_dev *indio_dev)
> TSL258X_CMD_ALS_INT_CLR));
>
> if (ret < 0) {
> - dev_err(&chip->client->dev,
> - "taos_i2c_write_command failed in taos_get_lux, err = %d\n",
> - ret);
> + dev_err(&chip->client->dev, "%s: failed to clear the interrupt bit\n",
> + __func__);
> goto done; /* have no data, so return failure */
> }
>
> @@ -246,7 +246,8 @@ static int taos_get_lux(struct iio_dev *indio_dev)
>
> /* note: lux is 31 bit max at this point */
> if (ch1lux > ch0lux) {
> - dev_dbg(&chip->client->dev, "No Data - Return last value\n");
> + dev_dbg(&chip->client->dev, "%s: No Data - Returning 0\n",
> + __func__);
> ret = 0;
> chip->als_cur_info.lux = 0;
> goto done;
> @@ -301,7 +302,7 @@ static int taos_als_calibrate(struct iio_dev *indio_dev)
> TSL258X_CMD_REG | TSL258X_CNTRL);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> - "%s failed to read from the CNTRL register\n",
> + "%s: failed to read from the CNTRL register\n",
> __func__);
> return ret;
> }
> @@ -309,16 +310,19 @@ static int taos_als_calibrate(struct iio_dev *indio_dev)
> if ((ret & (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON))
> != (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON)) {
> dev_err(&chip->client->dev,
> - "taos_als_calibrate failed: device not powered on with ADC enabled\n");
> + "%s: Device is not powered on and/or ADC is not enabled\n",
> + __func__);
> return -EINVAL;
> } else if ((ret & TSL258X_STA_ADC_VALID) != TSL258X_STA_ADC_VALID) {
> dev_err(&chip->client->dev,
> - "taos_als_calibrate failed: STATUS - ADC not valid.\n");
> + "%s: The two ADC channels have not completed an integration cycle\n",
> + __func__);
> return -ENODATA;
> }
> lux_val = taos_get_lux(indio_dev);
> if (lux_val < 0) {
> - dev_err(&chip->client->dev, "taos_als_calibrate failed to get lux\n");
> + dev_err(&chip->client->dev, "%s: failed to get lux\n",
> + __func__);
> return lux_val;
> }
> gain_trim_val = (unsigned int)(((chip->taos_settings.als_cal_target)
> @@ -326,8 +330,8 @@ static int taos_als_calibrate(struct iio_dev *indio_dev)
>
> if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
> dev_err(&chip->client->dev,
> - "taos_als_calibrate failed: trim_val of %d is out of range\n",
> - gain_trim_val);
> + "%s: trim_val of %d is not within the range [250, 4000]\n",
> + __func__, gain_trim_val);
> return -ENODATA;
> }
> chip->taos_settings.als_gain_trim = (int)gain_trim_val;
> @@ -353,7 +357,7 @@ static int tsl2583_set_als_time(struct tsl2583_chip *chip)
> TSL258X_CMD_REG | TSL258X_ALS_TIME,
> val);
> if (ret < 0) {
> - dev_err(&chip->client->dev, "%s failed to set the als time to %d\n",
> + dev_err(&chip->client->dev, "%s: failed to set the als time to %d\n",
> __func__, val);
> return ret;
> }
> @@ -374,8 +378,9 @@ static int tsl2583_set_als_gain(struct tsl2583_chip *chip)
> TSL258X_CMD_REG | TSL258X_GAIN,
> chip->taos_settings.als_gain);
> if (ret < 0)
> - dev_err(&chip->client->dev, "%s failed to set the gain to %d\n",
> - __func__, chip->taos_settings.als_gain);
> + dev_err(&chip->client->dev,
> + "%s: failed to set the gain to %d\n", __func__,
> + chip->taos_settings.als_gain);
>
> return ret;
> }
> @@ -387,8 +392,9 @@ static int tsl2583_set_power_state(struct tsl2583_chip *chip, u8 state)
> ret = i2c_smbus_write_byte_data(chip->client,
> TSL258X_CMD_REG | TSL258X_CNTRL, state);
> if (ret < 0)
> - dev_err(&chip->client->dev, "%s failed to set the power state to %d\n",
> - __func__, state);
> + dev_err(&chip->client->dev,
> + "%s: failed to set the power state to %d\n", __func__,
> + state);
>
> return ret;
> }
> @@ -411,8 +417,8 @@ static int tsl2583_chip_init_and_power_on(struct iio_dev *indio_dev)
> TSL258X_CMD_REG | TSL258X_INTERRUPT,
> TSL2583_INTERRUPT_DISABLED);
> if (ret < 0) {
> - dev_err(&chip->client->dev, "%s failed to disable interrupts\n",
> - __func__);
> + dev_err(&chip->client->dev,
> + "%s: failed to disable interrupts\n", __func__);
> return ret;
> }
>
> @@ -526,6 +532,8 @@ static ssize_t in_illuminance_lux_table_show(struct device *dev,
> return offset;
> }
>
> +#define TSL2583_MAX_LUX_INTS ((ARRAY_SIZE(taos_device_lux) - 1) * 3)
> +
> static ssize_t in_illuminance_lux_table_store(struct device *dev,
> struct device_attribute *attr,
> const char *buf, size_t len)
> @@ -545,12 +553,15 @@ static ssize_t in_illuminance_lux_table_store(struct device *dev,
> * and the last table entry is all 0.
> */
> n = value[0];
> - if ((n % 3) || n < 6 || n > ((ARRAY_SIZE(taos_device_lux) - 1) * 3)) {
> - dev_info(dev, "LUX TABLE INPUT ERROR 1 Value[0]=%d\n", n);
> + if ((n % 3) || n < 6 || n > TSL2583_MAX_LUX_INTS) {
> + dev_err(dev,
> + "%s: The number of entries in the lux table must be a multiple of 3 and within the range [6, %zu]\n",
> + __func__, TSL2583_MAX_LUX_INTS);
> goto done;
> }
> if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0) {
> - dev_info(dev, "LUX TABLE INPUT ERROR 2 Value[0]=%d\n", n);
> + dev_err(dev, "%s: The last 3 entries in the lux table must be zeros.\n",
> + __func__);
> goto done;
> }
>
> @@ -756,7 +767,8 @@ static int taos_probe(struct i2c_client *clientp,
>
> if (!i2c_check_functionality(clientp->adapter,
> I2C_FUNC_SMBUS_BYTE_DATA)) {
> - dev_err(&clientp->dev, "taos_probe() - i2c smbus byte data func unsupported\n");
> + dev_err(&clientp->dev, "%s: i2c smbus byte data functionality is unsupported\n",
> + __func__);
> return -EOPNOTSUPP;
> }
>
> @@ -774,13 +786,13 @@ static int taos_probe(struct i2c_client *clientp,
> TSL258X_CMD_REG | TSL258X_CHIPID);
> if (ret < 0) {
> dev_err(&clientp->dev,
> - "%s failed to read the chip ID register\n", __func__);
> + "%s: failed to read the chip ID register\n", __func__);
> return ret;
> }
>
> if ((ret & TSL2583_CHIP_ID_MASK) != TSL2583_CHIP_ID) {
> - dev_info(&clientp->dev, "%s received an unknown chip ID %x\n",
> - __func__, ret);
> + dev_err(&clientp->dev, "%s: received an unknown chip ID %x\n",
> + __func__, ret);
> return -EINVAL;
> }
>
> @@ -792,7 +804,8 @@ static int taos_probe(struct i2c_client *clientp,
> indio_dev->name = chip->client->name;
> ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
> if (ret) {
> - dev_err(&clientp->dev, "iio registration failed\n");
> + dev_err(&clientp->dev, "%s: iio registration failed\n",
> + __func__);
> return ret;
> }
>
>

\
 
 \ /
  Last update: 2016-11-13 13:08    [W:0.233 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site