lkml.org 
[lkml]   [2016]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 1/2] usb: dwc2: add amcc,dwc-otg support
Date
Hello,

On Friday, November 11, 2016 1:22:16 PM CET John Youn wrote:
> On 11/11/2016 12:59 PM, Christian Lamparter wrote:
> > This patch adds support for the "amcc,usb-otg" device
> > which is found in the PowerPC Canyonlands' dts.
> >
> > The device definition was added by:
> > commit c89b3458d8cc ("powerpc/44x: Add USB DWC DTS entry to Canyonlands board")'
> > but without any driver support as the dwc2 driver wasn't
> > available at that time.
> >
> > Note: The system can't use the generic "snps,dwc2" compatible
> > because of the special ahbcfg configuration. The default
> > GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang
> > when the USB and SATA is used concurrently.
>
> I don't want to add any more of these param structures to the driver
> unless really necessary. We're trying to remove usage of them in favor
> of using auto-detected defaults and device properties to override
> them.
Ok, thanks. I think that would work. I've attached an updated patch.
Can it be applied/queued now? Or do you want me to resent it later?

> The AHB Burst is actually one of the ones we were going to do next
> because our platform also doesn't work well with INCR4. In fact I'm
> thinking of making the default INCR.
Is that actually possible to change the default still? This would
require to re-evaluate all existing archs/platforms that use
"snps,dwc2" for INCR16 compatibility.

From what I can tell based would be:
bcm11351, bcm21664, bcm23550, exynos3250, stm32f429, rk3xxx,
stratix10, meson-gxbb, rt3050 and some Altera FPGAs.

> If that's all you need then a devicetree binding should be enough
> right?
Yes. The device is working fine so far.

Regards,
Christian

---
From 70dd4be016b89655a56bc8260f04683b50f07644 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Sun, 6 Nov 2016 00:39:24 +0100
Subject: [PATCH] usb: dwc2: add amcc,dwc-otg support

This patch adds support for the "amcc,usb-otg" device
which is found in the PowerPC Canyonlands' dts.

The device definition was added by:
commit c89b3458d8cc ("powerpc/44x: Add USB DWC DTS entry to Canyonlands board")'
but without any driver support as the dwc2 driver wasn't
available at that time.

Note: The system can't use the generic "snps,dwc2" compatible
because of the special ahbcfg configuration. The default
GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang
when the USB and SATA is used concurrently.

Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: John Youn <johnyoun@synopsys.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
v1->v2:
- moved definitons to params.c
- removed dma_enable / host_dma parameter
- added dma_desc_fs_enable parameter
v2->v3:
- removed parameters

Please queue this patch until GAHBCFG_HBSTLEN_INCR16 is the default
for ahbcfg.
---
Documentation/devicetree/bindings/usb/dwc2.txt | 1 +
drivers/usb/dwc2/params.c | 1 +
2 files changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 10a2a4b..6ccfe85 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -12,6 +12,7 @@ Required properties:
- "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
- "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
- "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
+ - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
- snps,dwc2: A generic DWC2 USB controller with default parameters.
- reg : Should contain 1 register range (address and length)
- interrupts : Should contain 1 interrupt
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 64d5c66..9506ab0 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -239,6 +239,7 @@ const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
{ .compatible = "amlogic,meson8b-usb", .data = &params_amlogic },
{ .compatible = "amlogic,meson-gxbb-usb", .data = &params_amlogic },
+ { .compatible = "amcc,dwc-otg", .data = NULL },
{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
--
2.10.2

\
 
 \ /
  Last update: 2016-11-11 23:06    [W:0.105 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site