lkml.org 
[lkml]   [2016]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] Documentation: devicetree: Add bindings info for rfkill-regulator
Date
This document gives information about how to write a devicetree
node that corresponds to the rfkill-regulator driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
.../devicetree/bindings/net/rfkill-regulator.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/rfkill-regulator.txt

diff --git a/Documentation/devicetree/bindings/net/rfkill-regulator.txt b/Documentation/devicetree/bindings/net/rfkill-regulator.txt
new file mode 100644
index 0000000..aac2fe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rfkill-regulator.txt
@@ -0,0 +1,18 @@
+Device tree bindings for the rfkill-regulator driver
+
+Required properties:
+ - compatible: should be "rfkill-regulator"
+ - rfkill-name: the name of this rfkill device
+ - rfkill-type: the type of this rfkill device;
+ must correspond to a valid rfkill_type from <uapi/linux/rfkill.h>
+ - vrfkill-supply: phandle to a regulator
+
+Example:
+
+ wlan-rfkill {
+ compatible = "rfkill-regulator";
+ rfkill-name = "WLAN power switch";
+ rfkill-type = <1>;
+
+ vrfkill-supply = <&wlan_power>;
+ };
--
2.9.3
\
 
 \ /
  Last update: 2016-11-01 11:59    [W:0.119 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site