lkml.org 
[lkml]   [2016]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] Input: gpio_keys - Set ABS params when using axes
Date
The gpio-keys supports the EV_ABS event type, but does not actually
configure the input device to work with that mode.

This patch configures the axis corresponding to button->code as being
in the range [-1,+1]. This makes it possible to use gpio-keys to
implement a hat (using the ABS_HAT0X /ABS_HAT0Y axes, with two GPIOs
each with values -1/+1).

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
drivers/input/keyboard/gpio_keys.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 7018c49..1f2850a 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -540,6 +540,9 @@ static int gpio_keys_setup_key(struct platform_device *pdev,

input_set_capability(input, button->type ?: EV_KEY, button->code);

+ if (button->type == EV_ABS)
+ input_set_abs_params(input, button->code, -1, 1, 0, 0);
+
/*
* Install custom action to cancel release timer and
* workqueue item.
--
2.9.3
\
 
 \ /
  Last update: 2016-11-01 11:26    [W:0.052 / U:1.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site