lkml.org 
[lkml]   [2016]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Staging: fbtft: Fixed open parenthesis alignment check
Date
This patch resolves all the following CHECKs caught by checkpatch.pl
CHECK: Alignment should match open parenthesis

Signed-off-by: Harman Kalra <harman4linux@gmail.com>
---
drivers/staging/fbtft/fb_ili9325.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/fbtft/fb_ili9325.c b/drivers/staging/fbtft/fb_ili9325.c
index c31e2e0..4ab4479 100644
--- a/drivers/staging/fbtft/fb_ili9325.c
+++ b/drivers/staging/fbtft/fb_ili9325.c
@@ -38,18 +38,15 @@

static unsigned int vc = 0x03; /* Vci1=Vci*0.80 */
module_param(vc, uint, 0);
-MODULE_PARM_DESC(vc,
-"Sets the ratio factor of Vci to generate the reference voltages Vci1");
+MODULE_PARM_DESC(vc, "Sets the ratio factor of Vci to generate the reference voltages Vci1");

static unsigned int vrh = 0x0d; /* VREG1OUT=Vci*1.85 */
module_param(vrh, uint, 0);
-MODULE_PARM_DESC(vrh,
-"Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT");
+MODULE_PARM_DESC(vrh, "Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT");

static unsigned int vdv = 0x12; /* VCOMH amplitude=VREG1OUT*0.98 */
module_param(vdv, uint, 0);
-MODULE_PARM_DESC(vdv,
-"Select the factor of VREG1OUT to set the amplitude of Vcom");
+MODULE_PARM_DESC(vdv, "Select the factor of VREG1OUT to set the amplitude of Vcom");

static unsigned int vcm = 0x0a; /* VCOMH=VREG1OUT*0.735 */
module_param(vcm, uint, 0);
--
1.7.9.5
\
 
 \ /
  Last update: 2016-10-09 16:44    [W:0.025 / U:0.928 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site