lkml.org 
[lkml]   [2016]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 9/9] [DO NOT MERGE] ARM: dts: sun6i: Enable 7" LCD panel on Sinlinx SinA31s
Date
Sinlinx SinA31s comes with an optional 7" 1024x600 LCD panel with
capacitive touch panel that bolts on to the board.

Enable the display using a panel with close timings. This patch is more
of a proof of concept. The LCD panel has no markings whatsoever, and
the timings are not exactly the same, and as a result the display produces
glitch lines sometimes.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
index 6ead2f5c847a..2d5cf8c9a12f 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -63,6 +63,23 @@
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
};
};
+
+ panel: panel {
+ compatible = "avic,tm070ddh03", "simple-panel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel_input: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_lcd>;
+ };
+ };
+ };
};

&ehci0 {
@@ -148,6 +165,19 @@
regulator-name = "vcc-gmac-phy";
};

+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd0_rgb888_pins>;
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_lcd: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+};
+
&usbphy {
status = "okay";
};
--
2.9.3
\
 
 \ /
  Last update: 2016-10-06 18:08    [W:0.116 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site