lkml.org 
[lkml]   [2016]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.4 23/93] hwmon: (adt7411) set bit 3 in CFG1 register
Date
4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Walle <michael@walle.cc>

commit b53893aae441a034bf4dbbad42fe218561d7d81f upstream.

According to the datasheet you should only write 1 to this bit. If it is
not set, at least AIN3 will return bad values on newer silicon revisions.

Fixes: d84ca5b345c2 ("hwmon: Add driver for ADT7411 voltage and temperature sensor")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/hwmon/adt7411.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/hwmon/adt7411.c
+++ b/drivers/hwmon/adt7411.c
@@ -30,6 +30,7 @@

#define ADT7411_REG_CFG1 0x18
#define ADT7411_CFG1_START_MONITOR (1 << 0)
+#define ADT7411_CFG1_RESERVED_BIT3 (1 << 3)

#define ADT7411_REG_CFG2 0x19
#define ADT7411_CFG2_DISABLE_AVG (1 << 5)
@@ -296,8 +297,10 @@ static int adt7411_probe(struct i2c_clie
mutex_init(&data->device_lock);
mutex_init(&data->update_lock);

+ /* According to the datasheet, we must only write 1 to bit 3 */
ret = adt7411_modify_bit(client, ADT7411_REG_CFG1,
- ADT7411_CFG1_START_MONITOR, 1);
+ ADT7411_CFG1_RESERVED_BIT3
+ | ADT7411_CFG1_START_MONITOR, 1);
if (ret < 0)
return ret;


\
 
 \ /
  Last update: 2016-10-06 11:22    [W:0.329 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site