lkml.org 
[lkml]   [2016]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] dt-bindings: oxnas: Update Pinctrl and GPIO for OX820 Support
Date
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Documentation/devicetree/bindings/gpio/gpio_oxnas.txt | 2 +-
Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
index 928ed4f..9665147 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
@@ -3,7 +3,7 @@
Please refer to gpio.txt for generic information regarding GPIO bindings.

Required properties:
- - compatible: "oxsemi,ox810se-gpio"
+ - compatible: "oxsemi,ox810se-gpio" or "oxsemi,ox820-gpio"
- reg: Base address and length for the device.
- interrupts: The port interrupt shared by all pins.
- gpio-controller: Marks the port as GPIO controller.
diff --git a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt
index d607432..09e81a9 100644
--- a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt
@@ -9,7 +9,7 @@ used for a specific device or function. This node represents configurations of
pins, optional function, and optional mux related configuration.

Required properties for pin controller node:
- - compatible: "oxsemi,ox810se-pinctrl"
+ - compatible: "oxsemi,ox810se-pinctrl" or "oxsemi,ox820-pinctrl"
- oxsemi,sys-ctrl: a phandle to the system controller syscon node

Required properties for pin configuration sub-nodes:
--
2.7.0
\
 
 \ /
  Last update: 2016-10-04 15:42    [W:0.094 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site