lkml.org 
[lkml]   [2016]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] net: phy: dp83867: Add documentation for optional impedance control
Date
Add documention of ti,impedance-control which can be used to
correct MAC impedance mismatch using phy extended registers.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
Documentation/devicetree/bindings/net/ti,dp83867.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
index 5d21141..85bf945 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -9,6 +9,18 @@ Required properties:
- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
for applicable values

+Optional property:
+ - ti,min-output-impedance - MAC Interface Impedance control to set
+ the programmable output impedance to
+ minimum value (35 ohms).
+ - ti,max-output-impedance - MAC Interface Impedance control to set
+ the programmable output impedance to
+ maximum value (70 ohms).
+
+Note: ti,min-output-impedance and ti,max-output-impedance are mutually
+ exclusive. When both properties are present ti,max-output-impedance
+ takes precedence.
+
Default child nodes are standard Ethernet PHY device
nodes as described in Documentation/devicetree/bindings/net/phy.txt

--
2.10.0.372.g6fe1b14
\
 
 \ /
  Last update: 2016-10-04 14:59    [W:0.075 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site