lkml.org 
[lkml]   [2016]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/4] spi: sun6i: Add binding for Allwinner H3 SPI controller
Date
H3 SPI has same architecture as A31 except FIFO capacity.
To configure the buffer size separately, compatible property should be
different. Optional DMA specifiers and example are added.

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
.../devicetree/bindings/spi/spi-sun6i.txt | 25 ++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
index 21de73d..2ec99b8 100644
--- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
@@ -1,7 +1,7 @@
-Allwinner A31 SPI controller
+Allwinner A31/H3 SPI controller

Required properties:
-- compatible: Should be "allwinner,sun6i-a31-spi".
+- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi".
- reg: Should contain register location and length.
- interrupts: Should contain interrupt.
- clocks: phandle to the clocks feeding the SPI controller. Two are
@@ -12,6 +12,11 @@ Required properties:
- resets: phandle to the reset controller asserting this device in
reset

+Optional properties:
+- dmas: DMA specifiers for rx and tx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "rx" and "tx" if present.
+
Example:

spi1: spi@01c69000 {
@@ -22,3 +27,19 @@ spi1: spi@01c69000 {
clock-names = "ahb", "mod";
resets = <&ahb1_rst 21>;
};
+
+spi0: spi@01c68000 {
+ compatible = "allwinner,sun8i-h3-spi";
+ reg = <0x01c68000 0x1000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
--
2.9.3
\
 
 \ /
  Last update: 2016-10-28 08:55    [W:0.103 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site