lkml.org 
[lkml]   [2016]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: core: silence warning: "VDD1: ramp_delay not set"
Date
commit 73e705bf81ce ("regulator: core: Add set_voltage_time op")

introduced a new rdev_warn() if the ramp_delay is 0.

Apparently, on omap3/twl4030 platforms with dynamic voltage
management this results in non-ending spurious messages like

[ 511.143066] VDD1: ramp_delay not set
[ 511.662322] VDD1: ramp_delay not set
[ 513.903625] VDD1: ramp_delay not set
[ 514.222198] VDD1: ramp_delay not set
[ 517.062835] VDD1: ramp_delay not set
[ 517.382568] VDD1: ramp_delay not set
[ 520.142791] VDD1: ramp_delay not set
[ 520.502593] VDD1: ramp_delay not set
[ 523.062896] VDD1: ramp_delay not set
[ 523.362701] VDD1: ramp_delay not set
[ 526.143035] VDD1: ramp_delay not set

I have observed this on GTA04 while it is reported to occur on
N900 as well: https://bugzilla.kernel.org/show_bug.cgi?id=178371

This patch makes the warning appear only in debugging mode.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
drivers/regulator/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 67426c0..5c1519b 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2754,7 +2754,7 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev,
ramp_delay = rdev->desc->ramp_delay;

if (ramp_delay == 0) {
- rdev_warn(rdev, "ramp_delay not set\n");
+ rdev_dbg(rdev, "ramp_delay not set\n");
return 0;
}

--
2.7.3
\
 
 \ /
  Last update: 2016-10-27 16:05    [W:0.066 / U:7.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site