lkml.org 
[lkml]   [2016]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 1/4] watchdog: Remove hardlockup handler references
Date
Separate hardlockup code from watchdog.c. It is mostly straight forward.
Remove everything inside CONFIG_HARDLOCKUP_DETECTORS. This code will go
to file watchdog_hld.c.

We also define weak handlers watchdog_nmi_enable and watchdog_nmi_disable.

Signed-off-by: Babu Moger <babu.moger@oracle.com>
---
kernel/watchdog.c | 251 ++---------------------------------------------------
1 files changed, 7 insertions(+), 244 deletions(-)

diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 9acb29f..a88e179 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -24,7 +24,6 @@

#include <asm/irq_regs.h>
#include <linux/kvm_para.h>
-#include <linux/perf_event.h>
#include <linux/kthread.h>

/*
@@ -100,50 +99,8 @@
static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts);
static DEFINE_PER_CPU(unsigned long, soft_lockup_hrtimer_cnt);
static DEFINE_PER_CPU(struct task_struct *, softlockup_task_ptr_saved);
-#ifdef CONFIG_HARDLOCKUP_DETECTOR
-static DEFINE_PER_CPU(bool, hard_watchdog_warn);
-static DEFINE_PER_CPU(bool, watchdog_nmi_touch);
-static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts_saved);
-static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
-#endif
static unsigned long soft_lockup_nmi_warn;

-/* boot commands */
-/*
- * Should we panic when a soft-lockup or hard-lockup occurs:
- */
-#ifdef CONFIG_HARDLOCKUP_DETECTOR
-unsigned int __read_mostly hardlockup_panic =
- CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE;
-static unsigned long hardlockup_allcpu_dumped;
-/*
- * We may not want to enable hard lockup detection by default in all cases,
- * for example when running the kernel as a guest on a hypervisor. In these
- * cases this function can be called to disable hard lockup detection. This
- * function should only be executed once by the boot processor before the
- * kernel command line parameters are parsed, because otherwise it is not
- * possible to override this in hardlockup_panic_setup().
- */
-void hardlockup_detector_disable(void)
-{
- watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
-}
-
-static int __init hardlockup_panic_setup(char *str)
-{
- if (!strncmp(str, "panic", 5))
- hardlockup_panic = 1;
- else if (!strncmp(str, "nopanic", 7))
- hardlockup_panic = 0;
- else if (!strncmp(str, "0", 1))
- watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
- else if (!strncmp(str, "1", 1))
- watchdog_enabled |= NMI_WATCHDOG_ENABLED;
- return 1;
-}
-__setup("nmi_watchdog=", hardlockup_panic_setup);
-#endif
-
unsigned int __read_mostly softlockup_panic =
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE;

@@ -264,43 +221,12 @@ void touch_all_softlockup_watchdogs(void)
wq_watchdog_touch(-1);
}

-#ifdef CONFIG_HARDLOCKUP_DETECTOR
-void touch_nmi_watchdog(void)
-{
- /*
- * Using __raw here because some code paths have
- * preemption enabled. If preemption is enabled
- * then interrupts should be enabled too, in which
- * case we shouldn't have to worry about the watchdog
- * going off.
- */
- raw_cpu_write(watchdog_nmi_touch, true);
- touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL(touch_nmi_watchdog);
-
-#endif
-
void touch_softlockup_watchdog_sync(void)
{
__this_cpu_write(softlockup_touch_sync, true);
__this_cpu_write(watchdog_touch_ts, 0);
}

-#ifdef CONFIG_HARDLOCKUP_DETECTOR
-/* watchdog detector functions */
-static bool is_hardlockup(void)
-{
- unsigned long hrint = __this_cpu_read(hrtimer_interrupts);
-
- if (__this_cpu_read(hrtimer_interrupts_saved) == hrint)
- return true;
-
- __this_cpu_write(hrtimer_interrupts_saved, hrint);
- return false;
-}
-#endif
-
static int is_softlockup(unsigned long touch_ts)
{
unsigned long now = get_timestamp();
@@ -313,78 +239,18 @@ static int is_softlockup(unsigned long touch_ts)
return 0;
}

-#ifdef CONFIG_HARDLOCKUP_DETECTOR
-
-static struct perf_event_attr wd_hw_attr = {
- .type = PERF_TYPE_HARDWARE,
- .config = PERF_COUNT_HW_CPU_CYCLES,
- .size = sizeof(struct perf_event_attr),
- .pinned = 1,
- .disabled = 1,
-};
-
-/* Callback function for perf event subsystem */
-static void watchdog_overflow_callback(struct perf_event *event,
- struct perf_sample_data *data,
- struct pt_regs *regs)
-{
- /* Ensure the watchdog never gets throttled */
- event->hw.interrupts = 0;
-
- if (__this_cpu_read(watchdog_nmi_touch) == true) {
- __this_cpu_write(watchdog_nmi_touch, false);
- return;
- }
-
- /* check for a hardlockup
- * This is done by making sure our timer interrupt
- * is incrementing. The timer interrupt should have
- * fired multiple times before we overflow'd. If it hasn't
- * then this is a good indication the cpu is stuck
- */
- if (is_hardlockup()) {
- int this_cpu = smp_processor_id();
- struct pt_regs *regs = get_irq_regs();
-
- /* only print hardlockups once */
- if (__this_cpu_read(hard_watchdog_warn) == true)
- return;
-
- pr_emerg("Watchdog detected hard LOCKUP on cpu %d", this_cpu);
- print_modules();
- print_irqtrace_events(current);
- if (regs)
- show_regs(regs);
- else
- dump_stack();
-
- /*
- * Perform all-CPU dump only once to avoid multiple hardlockups
- * generating interleaving traces
- */
- if (sysctl_hardlockup_all_cpu_backtrace &&
- !test_and_set_bit(0, &hardlockup_allcpu_dumped))
- trigger_allbutself_cpu_backtrace();
-
- if (hardlockup_panic)
- nmi_panic(regs, "Hard LOCKUP");
-
- __this_cpu_write(hard_watchdog_warn, true);
- return;
- }
-
- __this_cpu_write(hard_watchdog_warn, false);
- return;
-}
-#endif /* CONFIG_HARDLOCKUP_DETECTOR */
-
static void watchdog_interrupt_count(void)
{
__this_cpu_inc(hrtimer_interrupts);
}

-static int watchdog_nmi_enable(unsigned int cpu);
-static void watchdog_nmi_disable(unsigned int cpu);
+int __weak watchdog_nmi_enable(unsigned int cpu)
+{
+ return 0;
+}
+void __weak watchdog_nmi_disable(unsigned int cpu)
+{
+}

static int watchdog_enable_all_cpus(void);
static void watchdog_disable_all_cpus(void);
@@ -577,109 +443,6 @@ static void watchdog(unsigned int cpu)
watchdog_nmi_disable(cpu);
}

-#ifdef CONFIG_HARDLOCKUP_DETECTOR
-/*
- * People like the simple clean cpu node info on boot.
- * Reduce the watchdog noise by only printing messages
- * that are different from what cpu0 displayed.
- */
-static unsigned long cpu0_err;
-
-static int watchdog_nmi_enable(unsigned int cpu)
-{
- struct perf_event_attr *wd_attr;
- struct perf_event *event = per_cpu(watchdog_ev, cpu);
-
- /* nothing to do if the hard lockup detector is disabled */
- if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
- goto out;
-
- /* is it already setup and enabled? */
- if (event && event->state > PERF_EVENT_STATE_OFF)
- goto out;
-
- /* it is setup but not enabled */
- if (event != NULL)
- goto out_enable;
-
- wd_attr = &wd_hw_attr;
- wd_attr->sample_period = hw_nmi_get_sample_period(watchdog_thresh);
-
- /* Try to register using hardware perf events */
- event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
-
- /* save cpu0 error for future comparision */
- if (cpu == 0 && IS_ERR(event))
- cpu0_err = PTR_ERR(event);
-
- if (!IS_ERR(event)) {
- /* only print for cpu0 or different than cpu0 */
- if (cpu == 0 || cpu0_err)
- pr_info("enabled on all CPUs, permanently consumes one hw-PMU counter.\n");
- goto out_save;
- }
-
- /*
- * Disable the hard lockup detector if _any_ CPU fails to set up
- * set up the hardware perf event. The watchdog() function checks
- * the NMI_WATCHDOG_ENABLED bit periodically.
- *
- * The barriers are for syncing up watchdog_enabled across all the
- * cpus, as clear_bit() does not use barriers.
- */
- smp_mb__before_atomic();
- clear_bit(NMI_WATCHDOG_ENABLED_BIT, &watchdog_enabled);
- smp_mb__after_atomic();
-
- /* skip displaying the same error again */
- if (cpu > 0 && (PTR_ERR(event) == cpu0_err))
- return PTR_ERR(event);
-
- /* vary the KERN level based on the returned errno */
- if (PTR_ERR(event) == -EOPNOTSUPP)
- pr_info("disabled (cpu%i): not supported (no LAPIC?)\n", cpu);
- else if (PTR_ERR(event) == -ENOENT)
- pr_warn("disabled (cpu%i): hardware events not enabled\n",
- cpu);
- else
- pr_err("disabled (cpu%i): unable to create perf event: %ld\n",
- cpu, PTR_ERR(event));
-
- pr_info("Shutting down hard lockup detector on all cpus\n");
-
- return PTR_ERR(event);
-
- /* success path */
-out_save:
- per_cpu(watchdog_ev, cpu) = event;
-out_enable:
- perf_event_enable(per_cpu(watchdog_ev, cpu));
-out:
- return 0;
-}
-
-static void watchdog_nmi_disable(unsigned int cpu)
-{
- struct perf_event *event = per_cpu(watchdog_ev, cpu);
-
- if (event) {
- perf_event_disable(event);
- per_cpu(watchdog_ev, cpu) = NULL;
-
- /* should be in cleanup, but blocks oprofile */
- perf_event_release_kernel(event);
- }
- if (cpu == 0) {
- /* watchdog_nmi_enable() expects this to be zero initially. */
- cpu0_err = 0;
- }
-}
-
-#else
-static int watchdog_nmi_enable(unsigned int cpu) { return 0; }
-static void watchdog_nmi_disable(unsigned int cpu) { return; }
-#endif /* CONFIG_HARDLOCKUP_DETECTOR */
-
static struct smp_hotplug_thread watchdog_threads = {
.store = &softlockup_watchdog,
.thread_should_run = watchdog_should_run,
--
1.7.1
\
 
 \ /
  Last update: 2016-10-26 18:05    [W:0.092 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site