lkml.org 
[lkml]   [2016]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC v2 2/2] mmc: sdhci: Ignore capability register when it comes to speeds and use DT binding instead when sdhci-cap-speed-modes-broken is set.
On Tue, Oct 25, 2016 at 02:30:25PM +0300, Adrian Hunter wrote:
> On 24/10/16 18:48, Zach Brown wrote:
> > On Mon, Oct 24, 2016 at 10:34:46AM +0300, Adrian Hunter wrote:
> >> On 22/10/16 00:35, Zach Brown wrote:
> >>> When the sdhci-cap-speed-modes-broken DT property is set, the driver
> >>> will ignore the bits of the capability registers that correspond to
> >>> speed modes.
> >>>
> >>> Signed-off-by: Zach Brown <zach.brown@ni.com>
> >>> ---
> >>> drivers/mmc/host/sdhci.c | 10 ++++++++++
> >>> 1 file changed, 10 insertions(+)
> >>>
> >>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> >>> index 1e25b01..59c62d3 100644
> >>> --- a/drivers/mmc/host/sdhci.c
> >>> +++ b/drivers/mmc/host/sdhci.c
> >>> @@ -22,6 +22,7 @@
> >>> #include <linux/scatterlist.h>
> >>> #include <linux/regulator/consumer.h>
> >>> #include <linux/pm_runtime.h>
> >>> +#include <linux/of.h>
> >>>
> >>> #include <linux/leds.h>
> >>>
> >>> @@ -3013,10 +3014,19 @@ void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps, u32 *caps1)
> >>>
> >>> host->caps = caps ? *caps : sdhci_readl(host, SDHCI_CAPABILITIES);
> >>>
> >>> + if (of_property_read_bool(mmc_dev(host->mmc)->of_node,
> >>> + "sdhci-cap-speed-modes-broken"))
> >>
> >> It rather begs the question: if you are going to do something sdhci
> >> specific, why not just read the whole of the caps register from DT?
> >>
> >
> > Throwing out the whole of the caps register seems like overkill. Also
>
> What about 2 values: one for the 64-bit caps register and one for a 64-bit
> mask of bits to override. That way you can select which bits to override
> and what to override them to.
>

I like this idea. I sent a RFC of it.

> > there are some things set by the caps that are not available in the DT.
> > For example, SDHCI_CAN_64BIT is set by the cap register and is used in
> > sdhci_setup_host to set host->flags SDHCI_USE_64_BIT_DMA.
>
> Not sure what you mean.
>

Your suggestion addresses my concern. So it's not an issue.

\
 
 \ /
  Last update: 2016-10-27 00:29    [W:0.060 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site