lkml.org 
[lkml]   [2016]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] leds: leds-pca963x: workaround group blink scaling issue
From
Date
Hi Matt,

Patch applied.

Thanks,
Jacek Anaszewski

On 10/13/2016 03:16 PM, Matt Ranostay wrote:
> PCA9632TK part seems to incorrectly blink at ~1.3x of the programmed
> rate. This patchset add a nxp,period-scale devicetree property to
> adjust for this misconfiguration.
>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
> Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
> ---
> Documentation/devicetree/bindings/leds/pca963x.txt | 3 +++
> drivers/leds/leds-pca963x.c | 18 +++++++++++++++---
> 2 files changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt
> index dafbe9931c2b..dfbdb123a9bf 100644
> --- a/Documentation/devicetree/bindings/leds/pca963x.txt
> +++ b/Documentation/devicetree/bindings/leds/pca963x.txt
> @@ -7,6 +7,9 @@ Optional properties:
> - nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults
> to open-drain, newer chips to totem pole)
> - nxp,hw-blink : use hardware blinking instead of software blinking
> +- nxp,period-scale : In some configurations, the chip blinks faster than expected.
> + This parameter provides a scaling ratio (fixed point, decimal divided
> + by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x.
>
> Each led is represented as a sub-node of the nxp,pca963x device.
>
> diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
> index 407eba11e187..b6ce1f2ec33e 100644
> --- a/drivers/leds/leds-pca963x.c
> +++ b/drivers/leds/leds-pca963x.c
> @@ -59,6 +59,7 @@ struct pca963x_chipdef {
> u8 grpfreq;
> u8 ledout_base;
> int n_leds;
> + unsigned int scaling;
> };
>
> static struct pca963x_chipdef pca963x_chipdefs[] = {
> @@ -189,6 +190,14 @@ static int pca963x_led_set(struct led_classdev *led_cdev,
> return pca963x_brightness(pca963x, value);
> }
>
> +static unsigned int pca963x_period_scale(struct pca963x_led *pca963x,
> + unsigned int val)
> +{
> + unsigned int scaling = pca963x->chip->chipdef->scaling;
> +
> + return scaling ? DIV_ROUND_CLOSEST(val * scaling, 1000) : val;
> +}
> +
> static int pca963x_blink_set(struct led_classdev *led_cdev,
> unsigned long *delay_on, unsigned long *delay_off)
> {
> @@ -207,14 +216,14 @@ static int pca963x_blink_set(struct led_classdev *led_cdev,
> time_off = 500;
> }
>
> - period = time_on + time_off;
> + period = pca963x_period_scale(pca963x, time_on + time_off);
>
> /* If period not supported by hardware, default to someting sane. */
> if ((period < PCA963X_BLINK_PERIOD_MIN) ||
> (period > PCA963X_BLINK_PERIOD_MAX)) {
> time_on = 500;
> time_off = 500;
> - period = time_on + time_off;
> + period = pca963x_period_scale(pca963x, 1000);
> }
>
> /*
> @@ -222,7 +231,7 @@ static int pca963x_blink_set(struct led_classdev *led_cdev,
> * (time_on / period) = (GDC / 256) ->
> * GDC = ((time_on * 256) / period)
> */
> - gdc = (time_on * 256) / period;
> + gdc = (pca963x_period_scale(pca963x, time_on) * 256) / period;
>
> /*
> * From manual: period = ((GFRQ + 1) / 24) in seconds.
> @@ -294,6 +303,9 @@ pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
> else
> pdata->blink_type = PCA963X_SW_BLINK;
>
> + if (of_property_read_u32(np, "nxp,period-scale", &chip->scaling))
> + chip->scaling = 1000;
> +
> return pdata;
> }
>
>


--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2016-10-25 09:16    [W:0.104 / U:3.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site