lkml.org 
[lkml]   [2016]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 3/4] platform/chrome: Introduce a new function to check EC features.
From
Date
On 09/08/16 14:59, Lee Jones wrote:
> On Mon, 01 Aug 2016, Enric Balletbo i Serra wrote:
>
>> From: Vincent Palatin <vpalatin@chromium.org>
>>
>> Use the EC_CMD_GET_FEATURES message to check the supported features for
>> each MCU.
>>
>> Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
>> [tomeu: adapted to changes in mainline]
>> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
>> [enric: remove references to USB PD feature and do it more generic]
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
>> Reviewed-by: Guenter Roeck <groeck@chromium.org>
>> ---
>>
>> Changes since v3:
>> - Add Reviewed-by tag.
>>
>> drivers/platform/chrome/cros_ec_dev.c | 37 +++++++++++++++
>> include/linux/mfd/cros_ec.h | 1 +
>> include/linux/mfd/cros_ec_commands.h | 84 +++++++++++++++++++++++++++++++++++
>
> For the MFD changes:
> Acked-by: Lee Jones <lee.jones@linaro.org>
Applied. Will send a note out at the end about an immutable branch.

Jonathan
>
>> 3 files changed, 122 insertions(+)
>>
>> diff --git a/drivers/platform/chrome/cros_ec_dev.c b/drivers/platform/chrome/cros_ec_dev.c
>> index 8abd80d..7eb5307 100644
>> --- a/drivers/platform/chrome/cros_ec_dev.c
>> +++ b/drivers/platform/chrome/cros_ec_dev.c
>> @@ -87,6 +87,41 @@ exit:
>> return ret;
>> }
>>
>> +static int cros_ec_check_features(struct cros_ec_dev *ec, int feature)
>> +{
>> + struct cros_ec_command *msg;
>> + int ret;
>> +
>> + if (ec->features[0] == -1U && ec->features[1] == -1U) {
>> + /* features bitmap not read yet */
>> +
>> + msg = kmalloc(sizeof(*msg) + sizeof(ec->features), GFP_KERNEL);
>> + if (!msg)
>> + return -ENOMEM;
>> +
>> + msg->version = 0;
>> + msg->command = EC_CMD_GET_FEATURES + ec->cmd_offset;
>> + msg->insize = sizeof(ec->features);
>> + msg->outsize = 0;
>> +
>> + ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
>> + if (ret < 0 || msg->result != EC_RES_SUCCESS) {
>> + dev_warn(ec->dev, "cannot get EC features: %d/%d\n",
>> + ret, msg->result);
>> + memset(ec->features, 0, sizeof(ec->features));
>> + }
>> +
>> + memcpy(ec->features, msg->data, sizeof(ec->features));
>> +
>> + dev_dbg(ec->dev, "EC features %08x %08x\n",
>> + ec->features[0], ec->features[1]);
>> +
>> + kfree(msg);
>> + }
>> +
>> + return ec->features[feature / 32] & EC_FEATURE_MASK_0(feature);
>> +}
>> +
>> /* Device file ops */
>> static int ec_device_open(struct inode *inode, struct file *filp)
>> {
>> @@ -245,6 +280,8 @@ static int ec_device_probe(struct platform_device *pdev)
>> ec->ec_dev = dev_get_drvdata(dev->parent);
>> ec->dev = dev;
>> ec->cmd_offset = ec_platform->cmd_offset;
>> + ec->features[0] = -1U; /* Not cached yet */
>> + ec->features[1] = -1U; /* Not cached yet */
>> device_initialize(&ec->class_dev);
>> cdev_init(&ec->cdev, &fops);
>>
>> diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
>> index 7769ea6..7f039b2 100644
>> --- a/include/linux/mfd/cros_ec.h
>> +++ b/include/linux/mfd/cros_ec.h
>> @@ -187,6 +187,7 @@ struct cros_ec_dev {
>> struct cros_ec_device *ec_dev;
>> struct device *dev;
>> u16 cmd_offset;
>> + u32 features[2];
>> };
>>
>> /**
>> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
>> index 8826e0f..1683003 100644
>> --- a/include/linux/mfd/cros_ec_commands.h
>> +++ b/include/linux/mfd/cros_ec_commands.h
>> @@ -713,6 +713,90 @@ struct ec_response_get_set_value {
>> /* More than one command can use these structs to get/set paramters. */
>> #define EC_CMD_GSV_PAUSE_IN_S5 0x0c
>>
>> +/*****************************************************************************/
>> +/* List the features supported by the firmware */
>> +#define EC_CMD_GET_FEATURES 0x0d
>> +
>> +/* Supported features */
>> +enum ec_feature_code {
>> + /*
>> + * This image contains a limited set of features. Another image
>> + * in RW partition may support more features.
>> + */
>> + EC_FEATURE_LIMITED = 0,
>> + /*
>> + * Commands for probing/reading/writing/erasing the flash in the
>> + * EC are present.
>> + */
>> + EC_FEATURE_FLASH = 1,
>> + /*
>> + * Can control the fan speed directly.
>> + */
>> + EC_FEATURE_PWM_FAN = 2,
>> + /*
>> + * Can control the intensity of the keyboard backlight.
>> + */
>> + EC_FEATURE_PWM_KEYB = 3,
>> + /*
>> + * Support Google lightbar, introduced on Pixel.
>> + */
>> + EC_FEATURE_LIGHTBAR = 4,
>> + /* Control of LEDs */
>> + EC_FEATURE_LED = 5,
>> + /* Exposes an interface to control gyro and sensors.
>> + * The host goes through the EC to access these sensors.
>> + * In addition, the EC may provide composite sensors, like lid angle.
>> + */
>> + EC_FEATURE_MOTION_SENSE = 6,
>> + /* The keyboard is controlled by the EC */
>> + EC_FEATURE_KEYB = 7,
>> + /* The AP can use part of the EC flash as persistent storage. */
>> + EC_FEATURE_PSTORE = 8,
>> + /* The EC monitors BIOS port 80h, and can return POST codes. */
>> + EC_FEATURE_PORT80 = 9,
>> + /*
>> + * Thermal management: include TMP specific commands.
>> + * Higher level than direct fan control.
>> + */
>> + EC_FEATURE_THERMAL = 10,
>> + /* Can switch the screen backlight on/off */
>> + EC_FEATURE_BKLIGHT_SWITCH = 11,
>> + /* Can switch the wifi module on/off */
>> + EC_FEATURE_WIFI_SWITCH = 12,
>> + /* Monitor host events, through for example SMI or SCI */
>> + EC_FEATURE_HOST_EVENTS = 13,
>> + /* The EC exposes GPIO commands to control/monitor connected devices. */
>> + EC_FEATURE_GPIO = 14,
>> + /* The EC can send i2c messages to downstream devices. */
>> + EC_FEATURE_I2C = 15,
>> + /* Command to control charger are included */
>> + EC_FEATURE_CHARGER = 16,
>> + /* Simple battery support. */
>> + EC_FEATURE_BATTERY = 17,
>> + /*
>> + * Support Smart battery protocol
>> + * (Common Smart Battery System Interface Specification)
>> + */
>> + EC_FEATURE_SMART_BATTERY = 18,
>> + /* EC can dectect when the host hangs. */
>> + EC_FEATURE_HANG_DETECT = 19,
>> + /* Report power information, for pit only */
>> + EC_FEATURE_PMU = 20,
>> + /* Another Cros EC device is present downstream of this one */
>> + EC_FEATURE_SUB_MCU = 21,
>> + /* Support USB Power delivery (PD) commands */
>> + EC_FEATURE_USB_PD = 22,
>> + /* Control USB multiplexer, for audio through USB port for instance. */
>> + EC_FEATURE_USB_MUX = 23,
>> + /* Motion Sensor code has an internal software FIFO */
>> + EC_FEATURE_MOTION_SENSE_FIFO = 24,
>> +};
>> +
>> +#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
>> +#define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32))
>> +struct ec_response_get_features {
>> + uint32_t flags[2];
>> +} __packed;
>>
>> /*****************************************************************************/
>> /* Flash commands */
>

\
 
 \ /
  Last update: 2016-10-25 19:14    [W:0.143 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site